Miele T 8023 C installation instructions Emptying the condensed water container

Page 16

Dryer care

Emptying the condensed water container

Depending on the installation, the condensed water will either be pumped to a drain or collected in the condensed water container, located in the upper left corner of the machine.

The container holds approximately 1 gallon of water.

The container should be emptied weekly.

Should the container be full when the tumble dryer is started, or if it becomes full during normal operation:

The "Container" indicator will light.

The buzzer will sound.

￿Pull out the container with both hands.

￿Empty the container.

￿When the container is empty, push it back into its opening until it clicks into place.

￿Restart the drying program if needed.

Do not drink the condensed water!

16

Image 16
Contents En US, CA Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsControl panel Before loading the dryer Program recommendationsTurn on the dryer and load the laundry Using the dryerSelect a program Available drying options Gentle, Anti-crease Extra DrySelect a drying option if needed TurboGentle Anti-creaseSelect the dryness level To adjust the buzzer volumeSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programChild lock Child lockTo activate the child lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumEmptying the condensed water container Cleaning the condenser Removing the condenserRinsing the condenser Returning the Condenser Quick Guide Remove this guide for easy referenceQuick Guide Turn on the dryer and loadLaundry Select a drying option if neededQuick Guide At the end of a programProgram When to use Normal Available drying options Turbo, Gentle, Anti-creaseChanging the light bulb What if the dryer will not run? Possible fault Solution Frequently asked questionsHow do I prevent static cling? What if the laundry is not dry enough? Possible fault After sales service PC UpdateRepairs MieleCareInstallation Instructions Save These Instructions Height of a stacked installation Washer / Dryer StackElectrical connection Installation Front viewRear view Installation site Transporting the dryer to the installation siteInstallation beneath a counter Reinstallation of the machine lidInstallation tips Level the dryer Room ventilationInstalling the drain hose External water drainDraining the condensed water into a sink Connection to a standpipeInstallation requirements demanding a non-return valve Example Connection to a sink standpipeInstall the connector 1 with the sink Disposal of the packing materials Caring for the environmentDisposal of an appliance All rights reserved Nr 460 400