Miele T 8023 C installation instructions Cleaning the condenser, Removing the condenser

Page 17

Dryer care

Cleaning the condenser

￿To reduce the risk of electric shock, disconnect the dryer from the power supply by shutting off the power main, tripping the circuit breaker or unplugging the power cord before performing maintenance.

￿Clean the condenser every 6 months and when the "Filter/Vent" indicator lights. Clean approximately every 100 uses when the dryer is used often.

￿Turn the condenser door lock down and remove the door up and out.

Removing the condenser

The access panel to the condenser is located on the lower left corner of the dryer.

￿Open the access panel with the supplied yellow tool.

￿Remove the panel up and out of the condenser access area.

￿Turn the condenser lock up.

￿Pull out the condenser.

17

Image 17
Contents En US, CA Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyControl panel Program recommendations Before loading the dryerSelect a program Using the dryerTurn on the dryer and load the laundry Extra Dry Available drying options Gentle, Anti-creaseTurbo Select a drying option if neededGentle Anti-creaseSelect the buzzer if desired To adjust the buzzer volumeSelect the dryness level At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programChild lock Child lockTo activate the child lock To deactivate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelEmptying the condensed water container Removing the condenser Cleaning the condenserRinsing the condenser Returning the Condenser Remove this guide for easy reference Quick GuideTurn on the dryer and load Quick GuideLaundry Select a drying option if neededAt the end of a program Quick GuideNormal Available drying options Turbo, Gentle, Anti-crease Program When to useChanging the light bulb How do I prevent static cling? Frequently asked questionsWhat if the dryer will not run? Possible fault Solution What if the laundry is not dry enough? Possible fault PC Update After sales serviceRepairs MieleCareInstallation Instructions Save These Instructions Washer / Dryer Stack Height of a stacked installationElectrical connection Front view InstallationTransporting the dryer to the installation site Rear view Installation siteReinstallation of the machine lid Installation beneath a counterRoom ventilation Installation tips Level the dryerExternal water drain Installing the drain hoseConnection to a standpipe Draining the condensed water into a sinkExample Connection to a sink standpipe Installation requirements demanding a non-return valveInstall the connector 1 with the sink Disposal of an appliance Caring for the environmentDisposal of the packing materials All rights reserved Nr 460 400