Miele T 8023 C installation instructions Install the connector 1 with the sink

Page 38

Installation
	Install the connector 1 with the sink
	connecting nut 2 to the sink
	standpipe.
	Usually the sink connection nut is
	equipped with a washer. Please
	remove the washer.
	Plug the hose end 4 to the connector
	1.
	Using a screwdriver tighten the hose
	clamp 3 directly behind the sink
	connecting nut.
	Install the non-return valve 5
	vertical or slightly angled. If installed
	horizontal it will not operate
1 Connector	correctly.

2Sink connecting nut

3Hose clamp

4Hose end

5Non-return valve

6Dryer drain hose

Connect the non-return valve 5 to the dryer drain hose 6. See illustration for the correct direction.

Fasten the non-return valve with the hose clamps.

34

Image 38

Contents En US, CA Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsControl panel Before loading the dryer Program recommendationsSelect a program Using the dryerTurn on the dryer and load the laundry Available drying options Gentle, Anti-crease Extra DryGentle Select a drying option if neededTurbo Anti-creaseSelect the buzzer if desired To adjust the buzzer volumeSelect the dryness level Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programTo activate the child lock Child lockChild lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumEmptying the condensed water container Cleaning the condenser Removing the condenserRinsing the condenser Returning the Condenser Quick Guide Remove this guide for easy referenceLaundry Quick GuideTurn on the dryer and load Select a drying option if neededQuick Guide At the end of a programProgram When to use Normal Available drying options Turbo, Gentle, Anti-creaseChanging the light bulb How do I prevent static cling? Frequently asked questionsWhat if the dryer will not run? Possible fault Solution What if the laundry is not dry enough? Possible fault Repairs After sales servicePC Update MieleCareInstallation Instructions Save These Instructions Height of a stacked installation Washer / Dryer StackElectrical connection Installation Front viewRear view Installation site Transporting the dryer to the installation siteInstallation beneath a counter Reinstallation of the machine lidInstallation tips Level the dryer Room ventilationInstalling the drain hose External water drainDraining the condensed water into a sink Connection to a standpipeInstallation requirements demanding a non-return valve Example Connection to a sink standpipeInstall the connector 1 with the sink Disposal of an appliance Caring for the environmentDisposal of the packing materials All rights reserved Nr 460 400