Miele T 8023 C Frequently asked questions, How do I prevent static cling?

Page 24

Frequently asked questions

What if the dryer will not run?

Possible fault	Solution

The "Start/Stop" button was not	Make sure the dryer is on. Press the
pressed.	"Start/ Stop" button to begin the drying
	program.

The circuit breaker tripped or the dryer	Make sure the dryer is plugged in or
is unplugged.	reset the circuit breaker.

The door is not closed.	Close the door properly.

How do I prevent static cling?

Add fabric softener to laundry when washing or select the "Less Dry" setting on the dryer.

Do not use fabric softener sheets in this dryer.

What if the drum light does not come on?

Possible fault	Solution

The bulb may be bad or burned out.	See "Changing the light bulb."

What if the "Child Lock" indicator flashes after turning the dryer on and a program cannot be started?

Possible fault	Solution

The child lock is activated.	Deactivate the child lock. See "Child
	Lock."

What if the program stops, the "End/Anti-crease" indicator lights and the buzzer sounds?

Possible fault	Solution

The drum is empty.	Load laundry into the dryer. The dryer
	will not operate when the drum is
	empty. Single items should be dried
	with "Sturdy" or a timed program and
	dry items in the "Fluff" program.

20

Image 24

Contents En US, CA Contents Important Safety Instructions This dryer is intended for residential use only Grounding InstructionsControl panel Before loading the dryer Program recommendationsUsing the dryer Turn on the dryer and load the laundrySelect a program Available drying options Gentle, Anti-crease Extra DrySelect a drying option if needed TurboGentle Anti-creaseTo adjust the buzzer volume Select the dryness levelSelect the buzzer if desired Start the program At the end of a programCanceling or changing a program Adding or removing laundry during a programChild lock Child lockTo activate the child lock To deactivate the child lockCleaning the lint filter Dryer careCleaning the exterior and the control panel Cleaning the drumEmptying the condensed water container Cleaning the condenser Removing the condenserRinsing the condenser Returning the Condenser Quick Guide Remove this guide for easy referenceQuick Guide Turn on the dryer and loadLaundry Select a drying option if neededQuick Guide At the end of a programProgram When to use Normal Available drying options Turbo, Gentle, Anti-creaseChanging the light bulb Frequently asked questions What if the dryer will not run? Possible fault SolutionHow do I prevent static cling? What if the laundry is not dry enough? Possible fault After sales service PC UpdateRepairs MieleCareInstallation Instructions Save These Instructions Height of a stacked installation Washer / Dryer StackElectrical connection Installation Front viewRear view Installation site Transporting the dryer to the installation siteInstallation beneath a counter Reinstallation of the machine lidInstallation tips Level the dryer Room ventilationInstalling the drain hose External water drainDraining the condensed water into a sink Connection to a standpipeInstallation requirements demanding a non-return valve Example Connection to a sink standpipeInstall the connector 1 with the sink Caring for the environment Disposal of the packing materialsDisposal of an appliance All rights reserved Nr 460 400