Miele T 8023 C Installation beneath a counter, Reinstallation of the machine lid

Page 33

Installation

Installation beneath a counter

When the machine lid needs to be removed to reduce the height of the machine, a built-under spacer kit* is necessary.

It must be installed by a Miele Service Technician.

The cover plate of the built-under kit replaces the appliance lid and ensures electrical safety.

An installation manual is supplied with the built-under spacer kit.

The electrical connection should be near the dryer and accessible at all times.

Extended machine feet* are recommended at a built-in height of more than 33 1/16" (840 mm).

Set the extended machine feet on a height of 1 9/16" (40 mm).

Remove the original machine feet and replace them with the extended ones.

One or two filler frames* are

recommended at a niche height of 34 1/4" / 34 13/16" to 36" / 36 5/8" (870/885 - 915/930 mm).

* (optional accessory)

An existing continuous toe kick must be interrupted at the dryer location!

Reinstallation of the machine lid

When reinstalling the appliance lid, check the firm fit of the cover at the rear bracket for a safe transport of the dryer.

29

Image 33

Contents En US, CA Contents Important Safety Instructions Grounding Instructions This dryer is intended for residential use onlyControl panel Program recommendations Before loading the dryerUsing the dryer Turn on the dryer and load the laundrySelect a program Extra Dry Available drying options Gentle, Anti-creaseTurbo Select a drying option if neededGentle Anti-creaseTo adjust the buzzer volume Select the dryness levelSelect the buzzer if desired At the end of a program Start the programAdding or removing laundry during a program Canceling or changing a programChild lock Child lockTo activate the child lock To deactivate the child lockDryer care Cleaning the lint filterCleaning the drum Cleaning the exterior and the control panelEmptying the condensed water container Removing the condenser Cleaning the condenserRinsing the condenser Returning the Condenser Remove this guide for easy reference Quick GuideTurn on the dryer and load Quick GuideLaundry Select a drying option if neededAt the end of a program Quick GuideNormal Available drying options Turbo, Gentle, Anti-crease Program When to useChanging the light bulb Frequently asked questions What if the dryer will not run? Possible fault SolutionHow do I prevent static cling? What if the laundry is not dry enough? Possible fault PC Update After sales serviceRepairs MieleCareInstallation Instructions Save These Instructions Washer / Dryer Stack Height of a stacked installationElectrical connection Front view InstallationTransporting the dryer to the installation site Rear view Installation siteReinstallation of the machine lid Installation beneath a counterRoom ventilation Installation tips Level the dryerExternal water drain Installing the drain hoseConnection to a standpipe Draining the condensed water into a sinkExample Connection to a sink standpipe Installation requirements demanding a non-return valveInstall the connector 1 with the sink Caring for the environment Disposal of the packing materialsDisposal of an appliance All rights reserved Nr 460 400