PTY codes
!
Switching to a broadcast program of your
choice temporarily
Another convenient RDS service is called “EON (Enhanced Other Network)”.
The EON indicator lights up while receiving a station with the EON code.
This allows the center unit to switch temporarily to a broadcast program of your choice (NEWS, TA, and/or INFO) from a different station except in the following cases:
•When you are listening to
•When listening to sources other than FM broadcasts.
•When the center unit is in standby mode.
Before you start, remember...
• The EON function is only applicable to preset stations.
From primary remote control only:
2
RDS selected
1
1. Press EON (ENTER) so that the last selected program type appears on the display window.
The center unit enters EON standby mode. When the center unit is in EON standby mode, the center unit is ready to receive the EON data (TA/NEWS/INFO) you select.
Receiving radio broadcasts
2. Press EON SELECT until the program type you want appears on the display window.
•Each time you press the button, the display changes to show the following:
=TA =NEWS/INFO =TA/INFO =TA/NEWS = TA/NEWS/INFO =INFO =NEWS =(back to the beginning)
TA | : Traffic Announcement in your area. |
NEWS | : News. |
INFO | : Program the purpose of which is to import advice |
| on the widest sense. |
CASE 1: When the program you have selected is broadcast on another station while FM is selected.
Ç
When a station starts broadcasting the program you have selected, the center unit automatically switches to the station. The indicator for the received program type starts flashing.
Ç
When the program is over, the center unit returns to the previously selected station, but still remains in the EON standby mode. The indicator for the received program type stops flashing an remains lit.
CASE 2: When the selected program is broadcast on the station you have selected.
Ç
The center unit continues to receive the station, but the indicator for the received program type starts flashing.
Ç
When the program is over, the indicator for the received program type stops flashing and remains lit, but the center unit remains in the EON standby mode.
To stop listening to the program selected by EON
Press EON so that the program type (TA/NEWS/INFO) indicator goes off from the display window. The center unit enters EON off mode and goes back to the previously selected station.
•Each time you press EON, the EON mode alternates between standby mode and off mode.
Notes:
•EON data sent from some stations may not be compatible with the center unit.
•In EON standby mode, if you change the source, EON standby mode is canceled temporarily.
•While listening to a program tuned in by the EON function, you cannot use source selected buttons and PTY SEARCH button.
When an emergency broadcast (ALARM signal) is sent from an FM station:
Emergency broadcasts are selected automatically only when an FM station broadcasting the RDS signal is selected.
Emergency broadcasts are not selected while AM (MW) and non- RDS stations are selected, while other sources are selected, or while the center unit is in the standby mode.
The TEST signal is used for equipment test — whether it can receive the ALARM signal correctly.
The TEST signal makes the center unit work in the same way as the ALARM signal does. If the TEST signal is received, the center unit automatically switches to the station broadcasting the TEST signal.
While receiving the test signal, “TEST” appears on the display window.
39