JVC TH-A10R manual Speaker Menu Settings, Opening the Speaker Menu, Switching speaker mode

SPEAKER MENU Settings

Use the primary remote control to perform speaker settings with the	Opening the SPEAKER MENU
on-screen SPEAKER MENU.
	1.
Buttons used ————————————————		Stop DVD image playback on the TV screen.
MAIN ON SCREEN, the 2/3/5/°cursors, and ENTER.		Select a playback source other than the tuner. If the playback
		source is set to DVD, press STOP to quit playback.

MAIN ON SCREEN

ON SCREEN/MENU selected

2/3/5/°cursors, and ENTER

Before performing speaker settings ———————

There are two speaker modes, STANDARD and EXPERT.

STANDARD : This is the default setting for using the speakers that come with this system.

EXPERT : Use expert settings when speaker placement prevents full 3-dimensional surround sound, or when using speakers other than those that came with the system.

Speaker mode

When the speaker mode is set to STANDARD, only the speaker mode may be changed. Other options (shown in gray) cannot be selected.

Setting the speaker mode to EXPERT enables additional speaker setting options.

(The enabled options will be highlighted)

2. Press MAIN ON SCREEN.

The MAIN MENU will be displayed.

3. Move the pointer to the SPEAKER MENU tag using the 2/3cursors.

4. When you are finished with on-screen settings,

press MAIN ON SCREEN again to close the

SPEAKER MENU.

Switching speaker mode

1. Open the SPEAKER MENU.

See “Opening the SPEAKER MENU”.

2. Move the pointer to STANDARD using the 5/° cursors.

Speaker mode

3. Use the 2/3cursors to switch between

STANDARD and EXPERT.

Enabled options will be highlighted.

45