Operating Other Manufacturers’ Video Equipment
This primary remote control can transmit control signals for other manufacturers’ VCRs and TVs. By changing the transmittable signals from preset ones to the other manufacturers’, you can operate the other manufacturer’s components using this remote control.
When operating the other manufacturers’ components, refer also to the manuals supplied with them. To operate these components with the remote control, first you need to set the manufacturer’s code each for VCR and TV.
Primary remote control
To change the transmittable signals for operating another manufacturer’s TV
1. | Press and hold |
|
|
| TV. |
|
|
| |||
| |||||
2. |
|
| |||
Press TV/DBS. |
| ||||
3. |
| ||||
Enter manufacturer’s code (two digits) using | |||||
| buttons 1 ~ 9, and 0. |
| |||
See the list on page 58 to find the code.
Examples: For a JVC product, press 0 then 1.
For a Magnavox product, press 1 then 0.
4. Release 
TV.
The following buttons can be used for operating the TV:
|
| TV | : Turns on and off the TV. |
| |||
TV VOL +/– | : Adjusts the volume. | ||
TV/VIDEO | : Sets the input mode (either TV or VIDEO). | ||
After pressing TV/DBS, you can perform the following operations on a TV:
CHANNEL
1 ~ 10, 0, 100+ (+10) : Selects the channels.
100+ (+10) button will function as the ENTER button if your TV requires pressing ENTER after selecting a channel number.
Note:
• Refer to the manual supplied with your TV.
5.Try to operate your TV by pressing 
TV.
When your TV turns on or off, you have entered the correct code.
If there are more than one code listed for your brand of TV, try
each one until the correct one is entered.
57