JVC GVT0150-008A, GVT0150-008UX, GVT0150-008US, GVT0150-008UN manual Speaker layout, Connecting a TV

Page 16

Connections

Do not connect the power cord until all other connections have been made.

Speaker layout

 

Center speaker

Front left

 

 

Front right

speaker

 

 

speaker

Powered subwoofer

Surround left

Surround right

speaker

speaker

•Place the satellite speakers on a flat and level surface.

•The front and center speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, they may cause color distortions. So, pay attention to the following when installing the speakers.

–When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers. Then wait at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.

•The surround speakers are not magnetically shielded.

If it is located nearby the TV or monitor, it will probably cause color distortion on the screen. To avoid this, do not place the speaker nearby the TV or monitor.

•Be sure to place the powered subwoofer to the TV’s right. If you place the powered subwoofer to the TV’s left, keep sufficient distance between them to prevent the TV screen from appearing mottled.

Connecting a TV

•You can get better picture quality in the order — Component video > S-video > Composite video.

•Distortion of picture may occur when connecting to the TV via a VCR, or to a TV with a built-in VCR.

•You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (A pg. 39)

7To connect a TV equipped with the component video input jacks

Center unit

TV

To component video input

Component video cord (not supplied)

NOTE

•If your TV supports progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active. (A pg. 19)

•If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.

•The component video signals can be output only when you select “DVD” as the source to play. (A pg. 18)

7To connect a TV equipped with the composite or S- video jacks

Center unit

Composite video cord (supplied)

or

 

S-video cord

 

(not supplied)

 

Align the 5 marks.

 

To S-video input

To composite

 

video input

 

TV

NOTE

•Select the appropriate scan mode according to your TV. See “Changing the scan mode”. (A pg. 19)

13

Page 15 Page 17
Image 16
Page 15 Page 17
Contents TH-C9 Important for Laser Products XV-THC9/ XV-THC6 Table of contents Supplied accessories Safety precautionsIntroduction Important cautionsAbout discs Playable disc typesFront panel center unit Description of parts and controlsRear panel center unit Setting the Voltage Selector Except for Australia Powered subwooferDo not block the ventilation openings Remote control Operating the system from the remote controlConnecting the FM and AM antennas ConnectionsAM loop antenna FM antennaFront speakers TH-C9 Connecting the satellite front, center, surround speakersBefore assembling When installing the front and surround speakers on the wall Front and surround speakers TH-C6Surround speakers TH-C9 Center speakerPrecautions for daily use Before connecting the speaker cordsTwist and pull the insulation coat off and remove This page is except for TH-C9 ConnectionsConnecting a TV Speaker layoutConnecting the powered subwoofer Connecting to a digital componentConnecting to an analog component Connecting the power cordOperating external components with the remote control Operating the TVOperating the DBS tuner or Catv converter Release TVOperating the VCR Release F VCR/DBSBasic operations Turning the system on/offPress Audio PressAdjusting the volume Volume Listening with headphones not suppliedAdjusting the brightness of the indications Dimmer Selecting the source to playSleep Timer Sleep Adjusting the output level of the subwoofer and speakersAdjusting the treble sound Treble Adjusting the bass sound BassSetting appears on the display window Optimizing the speaker settings Smart Surround SetupWhen Failed ! appears on the TV screen Playback Basic playbackPlace a disc Press DiscMP3/WMA file Playback information on the display windowJpeg file One touch replay Fast-forward/fast-reverse searchPress y or Press and hold x orSkip to the beginning of a desired selection Locating a desired title/ group using number buttonsPlaying back a bonus group About the play mode on a DVD VR disc Press TOP MENU/PG or MENU/PL. VRPress Y/5 to select the desired title/ playlist To clear the control displayUsing the surround mode Advanced operationsAuto Surround Auto SUR Dolby SurroundUsing the on-screen bar Selecting the surround modePress Surround repeatedly to select the desired mode Showing the on-screen barChanging the time information Contents of the on-screen bar during playbackPress on Screen twice Locating a desired scene using a VCD/ Svcd menu with PBC Locating a desired chapter/track using the on-screen barPlaying from a specified position on a disc Locating a desired scene from the DVD menuUsing the file control display Locating a desired position by specifying the timeUse number buttons 0-9 to enter the time Press Cursor 3/2/Y/5 to select the desired group/track/fileSelecting the subtitle Resume playbackSelecting a view angle Selecting the audio Special picture playbackFrame-by-frame playback Playing back in slow-motionSelecting browsable still picture recorded on DVD Audio Changing the VFP settingZooming Press Cursor Y/5 to change the setting Press Enter Repeat steps 3 to 6 to adjust other parameters Press VFPProgram playback Press 3 play buttonRandom playback Repeat playbackRepeating the current selection or all discs Press RepeatTray lock Repeating a desired part A-B RepeatSound and other settings Press SettingPress Cursor 3/2 to make an adjustment or selection Press Cursor Y/5 to select the item you want to setUsing the setup menus Setting DVD preferencesMenu description Picture menu Picture Audio menu AudioSpeaker setting menu Other setting menu OthersManual tuning Setting the AM tuner interval spacingTuner operations Selecting the FM reception mode Preset tuningReducing the noise of AM broadcast Maintenance TroubleshootingCleaning the system ReferencesSpecifications Center unit XV-THC9/XV-THC6/XV-THC3Subwoofer SP-PWC9 Subwoofer SP-PWC6/SP-PWC3Satellite Speakers SP-XTHC6 Satellite Speakers SP-XTHC9Satellite Speakers SP-XTHC3 Mains AC Line Instruction not applicable for Australia TH-C9/TH-C6/ TH-C3DVD Digital Theater System Important for Laser Products XV-THC6/ XV-THC3 AV Compu Link remote control System References Introduction ALL Pg pg pg 12 pg Setting the Voltage Selector Remote control Connections On next Center speaker TH-C6 Before connecting the speaker cords Speaker layout Connecting the powered subwoofer With the remote control See page 13 for button locations Buttons described below are used on pages 15 to Selecting the source to play Sleep Timer Sleep Optimizing the speaker settings Smart Surround Setup Buttons described below are used on pages 19 to See page 19 for button locations One touch replay Skip to the beginning of a desired selection Press TOP MENU/PG or MENU/PL. VR Buttons described below are used on pages 24 to See page 24 for button locations Changing the time information Playing from a specified position on a disc Using the file control display Resume playback Selecting the audio Selecting browsable still picture recorded on DVD Audio Program playback Random playback Tray lock Sound and other settings Setting DVD preferences Picture menu Picture SPK. Setting Buttons described below are used on pages 39 to See page 39 for button locations AV Compu Link remote control system Connecting a TV and VCRAvailable functions Connect the center unit to a TV and VCRReferences Center unit XV-THC6/XV-THC3 SSatellite Speakers SP-XTHC3 Mains AC Line Instruction SP-PWC6/SP-PWC3
Top Page Image Contents