Tuner operations
IMPORTANT
Before using the remote control for the following operation;
1 Set the remote control mode selector to
AUDIO.
2 Press FM/AM.
NOTE
•When FM or AM is selected as the source, you can select All Channel Stereo (ALL ST) and SURR OFF mode.
The buttons described below are used on pages 41 to 42.
Setting the AM tuner interval spacing
Some countries space AM stations 9 kHz apart, and some countries use 10 kHz spacing.
You can only change the AM tuner interval spacing while tuning into an AM station.
•You can operate the following procedures using the buttons on the front panel.
On the center unit ONLY:
7To change the interval spacing into 10 kHz
Press 8 while holding down 7.
7To change the interval spacing into 9 kHz
Press 3 while holding down 7.
FM/AM
AUDIO
TUNINGTUNING
MEMORY FM MODE
Remote control mode selector
/
Number buttons
Manual tuning
1 Press FM/AM repeatedly to select the band.
Example:
When the system is tuned in to 810 kHz.
AM | 8 | 1 0 kHz |
2 Press TUNING 9/( repeatedly until you find the frequency you want.
When you hold down the button until the system starts searching for stations and then release it, the system stops searching automatically when a station of sufficient signal strength is tuned in to.
NOTE
•When an FM stereo program is received, the ST indicator lights on the display window.
41