References
Specifications
7Center unit (XV-THC6/XV-THC3)
Audio section
Total Harmonic Distortion 0.02 %
NOTE: This value is measured at System cord CONNECTOR for reference.
Digital input*1: |
|
DIGITAL IN (DBS): | |
(OPTICAL) | (660 nm E30 nm) |
*1 Corresponding to Linear PCM, Dolby Digital, and DTS Digital Surround (with sampling frequency — 32 kHz, 44.1 kHz, 48 kHz)
Video section |
|
|
Video System: | PAL/NTSC |
|
Horizontal Resolution: | 500 lines |
|
64 dB |
| |
Video output level |
|
|
Composite: | 1.0 |
|
1.0 |
| |
For PAL: 0.3 | ||
| For NTSC: 0.286 | |
1.0 |
| |
0.7 |
| |
Video input sensitivity/Impedance (VCR IN) |
| |
Composite: | 1.0 |
|
1.0 |
| |
For PAL: 0.3 | ||
| For NTSC: 0.286 | |
Tuner section |
|
|
Tuning Range |
|
|
FM: | 87.5 MHz to 108.0 MHz | |
AM: | 531 kHz to 1 710 kHz | |
| (at 9 kHz channel spacing) | |
| 530 kHz to 1 710 kHz | |
| (at 10 kHz channel spacing) | |
General |
|
|
Power Requirements: | AC | , 50/60 Hz |
Power Consumption: | 19 W (at operation) |
1.9W (in standby mode)
Dimensions (W M H M D):
| 400 mm M 85 mm M 399 mm |
Mass: | 4.2 kg |
7Subwoofer (SP-PWC6/SP-PWC3)
Amplifier section |
|
Front: | 140W per channel, RMS at 4 C at |
| 1 kHz, with 10% total harmonic |
| distortion. |
Center/Surround: | 130W per channel, RMS at 4 C at |
| 1 kHz, with 10% total harmonic |
| distortion. |
Subwoofer: | 140 W, RMS at 4 C at 100 Hz, with |
| 10% total harmonic distortion. |
Speaker section |
|
Speaker unit: | 16 cm |
Power Handling Capacity: | 140 W |
Impedance: | 4 C |
Frequency Range: | 30 Hz to 200 Hz |
General |
|
Power Requirements: | AC 110 V/ AC 127 V/ |
| AC |
Power Consumption: | 135 W (at operation) |
| 0 W (in standby mode) |
Dimensions (W M H M D): | |
| 169 mm M 411 mm M 459 mm |
Mass: | 11.3 kg |
43