JVC GVT0150-008UW, GVT0150-008UX, GVT0150-008US manual With the remote control, Operating the TV

Operating external components with the remote control

Operating external components

The buttons described below are used on pages 13 and 14.

with the remote control

TV/VIDEO

TV VCR/DBS

VCR DBS

TV VOL CHANNEL

TV	Remote control
VCR/DBS	mode selector
	(play button)

ENTER

REC

Number buttons

TV RETURN 100+

NOTE

•Manufacturers’ codes are subject to change without notice.

•Set the codes again after replacing the batteries of the remote control.

Operating the TV

7To set the manufacturer’s code

You can operate a JVC TV without setting the manufacturer’s code.

1 Slide the remote control mode selector to TV.

2 Press and hold TV.

Keep the button pressed until step 4 is finished.

3 Press ENTER.

4 Press number buttons (1-9, 0) to enter the manufacturer’s code (2 digits).

Examples:

For a Hitachi TV:

Press 1, then 0.

For a Toshiba TV:

Press 0, then 8.

Manufacturer	Code	Manufacturer	Code
JVC	01	Samsung	12
Hitachi	10	Sharp	06
Magnavox	02	Sony	07
Mitsubishi	03	Toshiba	08
Panasonic	04, 11	Zenith	09
RCA	05

5 Release TV.

If there is more than one code listed for corresponding brand, try each one until you enter the correct one.

7Operation

Aim the remote control at the TV.

IMPORTANT

Before using the remote control to operate a TV;
• Set the remote control mode selector to TV.
The following buttons are available:
	TV:	Turns TV on and off.
TV VOL +/–:		Adjusts the volume.
TV/VIDEO:		Selects the input mode (either TV or
		VIDEO).
CHANNEL +/–:		Changes the channels.
1-10, 0, +10 (100+): Selects the channel.
TV RETURN:		Alternates between the previously selected
		channel and the current channel.

Operating the DBS tuner or CATV converter

7To set the manufacturer’s code

1 Slide the remote control mode selector to VCR/DBS.

2 Press DBS.

3 Press and hold F VCR/DBS.

Keep the button pressed until step 5 is finished.

4 Press ENTER.

13