JVC GVT0150-008UG, GVT0150-008UX, GVT0150-008US, GVT0150-008UN, GVT0150-008A manual Speaker layout

Page 63

Connections

Do not connect the power cord until all other connections have been made.

Speaker layout

 

Center speaker

Front left

 

 

Front right

speaker

 

 

speaker

Powered subwoofer

Surround left

Surround right

speaker

speaker

•Place the satellite speakers on a flat and level surface.

•The front and center speakers are magnetically shielded to avoid color distortions on TVs. However, if not installed properly, they may cause color distortions. So, pay attention to the following when installing the speakers.

–When placing the speakers near a TV set, turn off the TV’s main power switch or unplug it before installing the speakers. Then wait at least 30 minutes before turning on the TV’s main power switch again.

Some TVs may still be affected even though you have followed the above. If this happens, move the speakers away from the TV.

•The surround speakers are not magnetically shielded.

If it is located nearby the TV or monitor, it will probably cause color distortion on the screen. To avoid this, do not place the speaker nearby the TV or monitor.

•Be sure to place the powered subwoofer to the TV’s right. If you place the powered subwoofer to the TV’s left, keep sufficient distance between them to prevent the TV screen from appearing mottled.

Connecting a TV

•You can get better picture quality in the order — Component video > S-video > Composite video.

•Distortion of picture may occur when connecting to the TV via a VCR, or to a TV with a built-in VCR.

•You need to set “MONITOR TYPE” in the PICTURE menu correctly according to the aspect ratio of your TV. (A pg. 37)

7To connect a TV equipped with the component video input jacks

Center unit

TV

To component video input

Component video cord (not supplied)

NOTE

•If your TV supports progressive video input, you can enjoy a high quality picture by setting the progressive scan mode to active. (A pg. 17)

•If the component video input jacks of your TV are of the BNC type, use a plug adapter (not supplied) to convert the pin plugs to BNC plugs.

•The component video signals can be output only when you select “DVD” as the source to play. (A pg. 16)

7To connect a TV equipped with the composite or S- video jacks

Center unit

Composite video cord (supplied)

or

 

S-video cord

 

(not supplied)

 

Align the 5 marks.

 

To S-video input

To composite

 

video input

 

TV

NOTE

•Select the appropriate scan mode according to your TV. See “Changing the scan mode”. (A pg. 17)

11

Page 62 Page 64
Image 63
Page 62 Page 64
Contents TH-C9 Important for Laser Products XV-THC9/ XV-THC6 Table of contents Important cautions Supplied accessoriesSafety precautions IntroductionPlayable disc types About discsDescription of parts and controls Front panel center unitRear panel center unit Powered subwoofer Setting the Voltage Selector Except for AustraliaDo not block the ventilation openings Operating the system from the remote control Remote controlFM antenna Connecting the FM and AM antennasConnections AM loop antennaConnecting the satellite front, center, surround speakers Front speakers TH-C9Before assembling Front and surround speakers TH-C6 When installing the front and surround speakers on the wallCenter speaker Surround speakers TH-C9Before connecting the speaker cords Precautions for daily useTwist and pull the insulation coat off and remove Connections This page is except for TH-C9Speaker layout Connecting a TVConnecting the power cord Connecting the powered subwooferConnecting to a digital component Connecting to an analog componentRelease TV Operating external components with the remote controlOperating the TV Operating the DBS tuner or Catv converterRelease F VCR/DBS Operating the VCRPress Basic operationsTurning the system on/off Press AudioSelecting the source to play Adjusting the volume VolumeListening with headphones not supplied Adjusting the brightness of the indications DimmerAdjusting the bass sound Bass Sleep Timer SleepAdjusting the output level of the subwoofer and speakers Adjusting the treble sound TrebleOptimizing the speaker settings Smart Surround Setup Setting appears on the display windowWhen Failed ! appears on the TV screen Press Disc PlaybackBasic playback Place a discPlayback information on the display window MP3/WMA fileJpeg file Press and hold x or One touch replayFast-forward/fast-reverse search Press y orLocating a desired title/ group using number buttons Skip to the beginning of a desired selectionPlaying back a bonus group To clear the control display About the play mode on a DVD VR discPress TOP MENU/PG or MENU/PL. VR Press Y/5 to select the desired title/ playlistDolby Surround Using the surround modeAdvanced operations Auto Surround Auto SURShowing the on-screen bar Using the on-screen barSelecting the surround mode Press Surround repeatedly to select the desired modeContents of the on-screen bar during playback Changing the time informationPress on Screen twice Locating a desired scene from the DVD menu Locating a desired scene using a VCD/ Svcd menu with PBCLocating a desired chapter/track using the on-screen bar Playing from a specified position on a discPress Cursor 3/2/Y/5 to select the desired group/track/file Using the file control displayLocating a desired position by specifying the time Use number buttons 0-9 to enter the timeResume playback Selecting the subtitleSelecting a view angle Playing back in slow-motion Selecting the audioSpecial picture playback Frame-by-frame playbackChanging the VFP setting Selecting browsable still picture recorded on DVD AudioZooming Press 3 play button Press Cursor Y/5 to change the setting Press EnterRepeat steps 3 to 6 to adjust other parameters Press VFP Program playbackPress Repeat Random playbackRepeat playback Repeating the current selection or all discsRepeating a desired part A-B Repeat Tray lockPress Cursor Y/5 to select the item you want to set Sound and other settingsPress Setting Press Cursor 3/2 to make an adjustment or selectionSetting DVD preferences Using the setup menusMenu description Audio menu Audio Picture menu PictureOther setting menu Others Speaker setting menuSetting the AM tuner interval spacing Manual tuningTuner operations Preset tuning Selecting the FM reception modeReducing the noise of AM broadcast References MaintenanceTroubleshooting Cleaning the systemSubwoofer SP-PWC6/SP-PWC3 SpecificationsCenter unit XV-THC9/XV-THC6/XV-THC3 Subwoofer SP-PWC9Satellite Speakers SP-XTHC9 Satellite Speakers SP-XTHC6Satellite Speakers SP-XTHC3 TH-C9/TH-C6/ TH-C3 Mains AC Line Instruction not applicable for AustraliaDVD Digital Theater System Important for Laser Products XV-THC6/ XV-THC3 AV Compu Link remote control System References Introduction ALL Pg pg pg 12 pg Setting the Voltage Selector Remote control Connections On next Center speaker TH-C6 Before connecting the speaker cords Speaker layout Connecting the powered subwoofer With the remote control See page 13 for button locations Buttons described below are used on pages 15 to Selecting the source to play Sleep Timer Sleep Optimizing the speaker settings Smart Surround Setup Buttons described below are used on pages 19 to See page 19 for button locations One touch replay Skip to the beginning of a desired selection Press TOP MENU/PG or MENU/PL. VR Buttons described below are used on pages 24 to See page 24 for button locations Changing the time information Playing from a specified position on a disc Using the file control display Resume playback Selecting the audio Selecting browsable still picture recorded on DVD Audio Program playback Random playback Tray lock Sound and other settings Setting DVD preferences Picture menu Picture SPK. Setting Buttons described below are used on pages 39 to See page 39 for button locations Connect the center unit to a TV and VCR AV Compu Link remote control systemConnecting a TV and VCR Available functionsReferences Center unit XV-THC6/XV-THC3 SSatellite Speakers SP-XTHC3 SP-PWC6/SP-PWC3 Mains AC Line Instruction
Top Page Image Contents