AEG 72620 manual Detergent and conditioner Which detergent and conditioner?, Using Water Softener

Operating instructions

Detergent and conditioner

	Which detergent and conditioner?
	Use only detergents and conditioners which are suitable for use in
	washing machines. Always observe the manufacturer’s instructions.
	How much detergent and conditioner?
	The required quantity depends upon:
	• the amount of washing
2	If the detergent manufacturer does not include dosing instructions for
	reduced loads, use one third less for half loads and only half of the full

load detergent quantity for very small loads.

• extent of soiling of the washing

• hardness of tap water

Observe instructions for use and dosing provided by the detergent and conditioner manufacturer.

Using Water Softener

In the case of medium to very hard water (from hardness band II) water softener should be used. Observe the manufacturer’s instructions! Then always use detergent dosing for hardness band I (= soft). Information on the hardness of the water in your area is provided by your local water board.

2	Due to the fact that the water softener is added before the main wash
	detergent (pre-softening of the water), only eighty percent of the
	quantity of water softener indicated on the package is required.
	Information on Water Hardness
		Hardness Band	Water hardness in °dH	Water hardness in mmol/l
			(German hardness scale)	(millimol per litre)
		I – soft	0 – 7	to 1.3
		II – medium-hard	7 – 14	1.3 – 2.5
		III – hard	14 – 21	2.5 – 3.8
		IV – very hard	greater than 21	greater than 3.8

16