Operating instructions
Malfunction | Possible Cause | Remedy | |
| Drain hose is kinked. | Remove kink. | |
| Maximum pumping height | Please contact customer | |
Washing is not spun | (drain height 1m above the | service who have a retrofit | |
floor on which the machine | kit for pumping to heights of | ||
properly, water is still | |||
is standing) exceeded. | greater than 1m. | ||
visible in the drum. | |||
| Switch off the machine and | ||
Fault code (2 is dis- | Circulation pump is blocked. | ||
played. | unplug from the mains, clean | ||
| the circulation pump. | ||
|
| ||
| In the case of siphon con- | Clean siphon. | |
| nection: siphon is blocked. | ||
|
| ||
|
|
| |
Door cannot be opened | The door is locked for safety | Wait until the K (DOOR) | |
when the machine is | reasons (K/DOOR indicator | ||
indicator is green. | |||
switched off. | is off). | ||
| |||
| Tap is not fully open. | Open tap fully. | |
| The sieve in the threaded fit- |
| |
Remnants of detergent | ting on the water inlet hose | Clean sieve. | |
are building up in the | at the tap is blocked. |
| |
detergent drawer. | Sieve on threaded fitting for |
| |
|
| ||
| the water inlet hose on the | Clean sieve. | |
| machine is blocked. |
| |
| The cause is probably a | No negative impact on the | |
Rinse water is cloudy. | detergent with a high silicate | rinsing results, possibly use | |
| content. | liquid detergent. | |
When an additional |
|
| |
program button is | The additional program |
| |
pressed, the corre- | selected cannot be combined | Make another choice. | |
sponding indicator | with the program set. |
| |
does not illuminate. |
|
| |
|
|
|
30