Installation and Connection Instructions
Remove transportation protection
Attention! Be absolutely certain that all shipping braces have been removed before installing the appliance.
Store all shipping braces in a safe place in case they are required for future transport (moving).
3 | Special spanner H and cover caps E (2 off) and G (1 off) are supplied |
| with the appliance. |
0 1. Remove flexible tubing holder A.
2.Remove the two screws B with special spanner H.
3.Remove the four screws C.
4.Detach transportation rail D.
5.Close the two large openings with the cover caps E.
Attention! Press cover caps forcefully in, so that they snap into the rear wall (protecting the interior of the appliance against sprayed water).
6.Drive in the screws C into the four small holes again.
7.Remove the screw and compression spring F with special spanner H, cover the hole with caps G.
Attention! Press cover caps forcefully in, so that they snap into the rear wall (protecting the interior of the appliance against sprayed water).
40