Operating instructions
Additional Rinse and/or Water Cooling
The washing machine is set up for extremely low water consumption.
•For people who suffer from an allergy to detergents, it can be useful to rinse with more water (additional rinse).
•It can be necessary to cool down the water prior to pumping out in order to avoid thermal damage to plastic waste pipes (water cooling).
3 | The program duration and water consumption are increased by water |
| cooling and/or the additional rinse. |
| Additional Rinse (RINSE +) |
3 | If this function is enabled, an additional rinse in performed for the pro- |
| grams t (COTTONS/LINEN), Ã (DELICATES) and } (EASY- |
CARES).
As supplied from the factory, the additional rinse function is not ena- bled.
Enabling the additional rinse function:
0 1. Turn the program selector to F (SHORT SPIN).
2.Press the q (SOAKING) button for at least 5 seconds.
After the button has been kept pressed for 5 seconds, +Á (RINSE+) flashes on the program progress indicator for 5 seconds.
3.Release the q (SOAKING) button while +Á (RINSE+) is flashing. The additional rinse function is enabled once the flashing has ceased. It
continues to be enabled until specifically disabled.
When the additional rinse function is enabled, the +Á (RINSE+) indi- cator on the program progress display illuminates prior to program start and during the additional rinse.
4.If you wish to check whether the additional rinse function is enabled:
–Turn the program selector to F (SHORT SPIN).
–Press the q (SOAKING) button briefly.
If +Á (RINSE+) flashes on the program progress display, the addi- tional rinse function is enabled.
Disabling the additional rinse function:
0 1. Turn the program selector to F (SHORT SPIN).
2.Press the q (SOAKING) button for at least 5 seconds.
As soon as the button is pressed, +Á(RINSE+) flashes on the program progress display. After 5 seconds +Á (RINSE+) ceases to flash and illuminates continuously for a further 5 seconds.
35