Installation and Connection Instructions
Water feed
A flexible pressure tubing of 1.3m length is supplied.
If a longer feed tubing is needed, a complete
–For washing machines without
–For washing machines with
Attention! Under no circumstances may tubing be pieced together for the purpose of lengthening!
3 | Sealing rings are either inserted in plastic nuts of the tubing screw con- |
| nection or contained in an accompanying packet. Do not use other |
seals.
0 1. Connect the angled hose connector to the machine.
Attention! Plastic nut at the tube coupling may only be hand tightened.
2.Connect the straight hose connector to a water tap
with an R 3/4 (inch) thread.
Attention! Only tighten the plastic nuts on the hose connectors by hand.
3. By opening the water tap slowly prior to the initial operation, check whether the connection is tight.
44