AEG 74740 manual How much washing detergent and care agent?, Water Softener

Page 17

Instructions for use

Washing Detergents and Care Agents

 

Which washing detergent and care agent?

 

Use only washing detergents and care agents which are suitable for use

 

in washing machines. Always follow the manufacturer's instructions.

 

How much washing detergent and care agent?

 

The amount to be used depends on:

 

• the dirtiness of the washing

 

• the hardness category of the mains water supply

 

• the filling quantity

2

If the detergent manufacturer gives no details of the dosing quantities

 

for minimum loads, add one third less for half loads and, in the case of

very small loads and for EASY IRON (LEICHTBÜGELN, FACILE A RE- PASSER), only half the amount of detergent recommended for a full load.

Refer to the detergent/care agent manufacturer's instructions on use and dosage.

Water Softener

For medium to high water hardness (hardness category II or higher) you should use water softener. Pay attention to the manufacturer's instruc- tions. Always then meter detergent for hardness category I (= soft). The responsible water works can provide information on the local water hardness.

2

Since the water softener is added before the main washing detergent,

 

(water pre-softening), eighty percent of the softener quantity stated on

 

the package is sufficient.

 

 

 

Water Hardness Details

 

 

 

 

 

 

 

 

Water Hardness °dH

Water Hardness in mmol/l

 

Hardness Category

 

(degrees German

 

 

(millimol per litre)

 

 

 

hardness)

 

 

 

 

 

I – soft

 

0 - 7

up to 1.3

 

II – medium hard

 

7 - 14

1.3 - 2.5

 

III – hard

 

14 - 21

2.5 - 3.8

 

IV – very hard

 

over 21

over 3.8

 

 

 

 

 

17

Image 17
Contents ÖKO-LAVAMAT 74740 update Please read this user information carefully Dear customerTo any subsequent owners of the unit Practical use of the unitContents What to do if Remedying FaultsPage Correct Use SafetyBefore Putting into Operation for the First Time General Safety Child SafetyEnvironment Tips DisposalDispose the packing material For polyoxymethylene, e.g. plastic clipsDrawer for Washing Powder and Care Agent Unit DescriptionFront View Program Selector Control PanelWool WOLLE, LAINE/ P Handwash Additional Program Buttons Come effective at higher temperaturesMinutes. This is followed automatically by the main wash Shorter washing cycle for slightly dirty washingConsumption Values and Time Requirements Water Protection Aqua Control What Does Update Mean?Sort and Prepare the Washing Before the First WashPrepare the Washing Cycle Washing Types and Care Codes Water Softener How much washing detergent and care agent?After the Washing Program Ends Run a Washing CycleBrief Instructions Tables Setting the Washing ProgramPer minute Change Spin Speed / Select Rinse HoldRevolutions Soaking Duration Set the Delay Timer/Soaking DurationAdd the Washing Opening and Closing the Filling DoorAdd Washing Detergent/Care Agent If using Liquid Detergent/TabsCompartment for pre-wash agent/soaking agent Or for water softenerIf the time preselection is set Start the Washing ProgramIs pressed Multidisplay Completion of the Washing ProgramProgram sequence display Changing or aborting a program Changing a Washing ProgramSelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Washing Program TablesType Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Remedying FaultsRINSE+ SPÜLEN+ Repasser Rinse Spülen If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Cancel Additional Rinse When all the washing solution has drained offAdditional Rinse RINSE+/SPÜLEN+/RINCAGE+ Set Additional RinseSetting the Child Safety Child Safety FeatureFeature Cancelling the Child Safety FeatureSafety Instructions for Installation Setting up and connection instructionsRemove the Transport Safeguard Setting Up the UnitWhen transporting the unit with a sack trolley Transporting the UnitClose off the hole with the plug cap G Firmly pull both hose holders off the unitSetting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Dimensions Technical DataDelivery Heads over 1m Measurements in mmSchweiz Suisse Svizzera Page Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG