AEG 74740 manual What to do if, Remedying Faults

Page 34

Instructions for use

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.

• If the fault code E10, E20 or E40 is shown in the multidisplay, you may be able to rem- edy the fault yourself (see Faults Table be-

low). After remedying the fault, press the button START/PAUSE.

If the fault code is shown again, inform Customer Service.

•In the case of all other displayed faults (E and number or letter), please inform the Customer Service and state the fault code.

Problem

Possible Cause

Remedy

 

The mains plug is not

Plug in the mains plug.

 

plugged in.

 

 

 

The fuse of the building's

Replace the fuse.

 

wiring is not in order.

The washing machine

 

The filling door is not cor-

Close the filling door; the

does not work.

 

rectly closed.

lock must engage audibly.

 

The button START/PAUSE

Press the button START/

 

was not pressed for long

PAUSE until the program be-

 

enough.

gins.

The filling door cannot

 

Cancel the child lock

The child lock is set.

(see section “Child Safety

be closed.

 

Feature").

 

 

Fault code E40 ap-

 

 

pears. The indicator

The filling door is not

Close the filling door cor-

MAIN WASH

correctly closed.

rectly. Restart the program.

(HAUPTWÄSCHE,

 

 

LAVAGE) flashes.

 

 

 

 

 

34

Page 33 Page 35
Image 34
Page 33 Page 35
Contents ÖKO-LAVAMAT 74740 update To any subsequent owners of the unit Dear customerPlease read this user information carefully Practical use of the unitContents Remedying Faults What to do ifPage Before Putting into Operation for the First Time SafetyCorrect Use Child Safety General SafetyDispose the packing material DisposalEnvironment Tips For polyoxymethylene, e.g. plastic clipsFront View Unit DescriptionDrawer for Washing Powder and Care Agent Control Panel Program SelectorWool WOLLE, LAINE/ P Handwash Minutes. This is followed automatically by the main wash Come effective at higher temperaturesAdditional Program Buttons Shorter washing cycle for slightly dirty washingConsumption Values and Time Requirements What Does Update Mean? Water Protection Aqua ControlPrepare the Washing Cycle Before the First WashSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerBrief Instructions Run a Washing CycleAfter the Washing Program Ends Setting the Washing Program TablesRevolutions Change Spin Speed / Select Rinse HoldPer minute Set the Delay Timer/Soaking Duration Soaking DurationOpening and Closing the Filling Door Add the WashingCompartment for pre-wash agent/soaking agent If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Or for water softenerIs pressed Start the Washing ProgramIf the time preselection is set Program sequence display Completion of the Washing ProgramMultidisplay Select the Additional Program Changing a Washing ProgramChanging or aborting a program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingType Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorCleaning the drain pump Before cleaning the drain pumpRemedying Faults What to do ifRINSE+ SPÜLEN+ Repasser Rinse Spülen If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Additional Rinse RINSE+/SPÜLEN+/RINCAGE+ When all the washing solution has drained offCancel Additional Rinse Set Additional RinseFeature Child Safety FeatureSetting the Child Safety Cancelling the Child Safety FeatureSetting up and connection instructions Safety Instructions for InstallationWhen transporting the unit with a sack trolley Setting Up the UnitRemove the Transport Safeguard Transporting the UnitFirmly pull both hose holders off the unit Close off the hole with the plug cap GSetting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Delivery Heads over 1m Technical DataDimensions Measurements in mmSchweiz Suisse Svizzera Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents