AEG 74740 manual Electrical Connection, Water Connection, Permissible Water Pressure

Page 47

Setting up and connection instructions

Electrical Connection

Refer to the rating plate for details of the mains voltage, current type and the necessary fuses. The rating plate is located at the top behind the filling door.

; This unit conforms to the following EU directives:

–the ”Low Voltage Directive" 73/23/EU with changes

–the ”EMC Directive" 89/336/EWG with changes

Water Connection

3	The washing machine has safety features which prevent contamination
	of the drinking water and which conform to the legal regulations of

the water authorities (e.g. for Germany: DVGW regulations). Other pro- tection measures in the installation are therefore not necessary.

Attention!

– Units for connection to cold water must not be connected to hot wa- ter!

– Use only new sets of hoses for connection!

Permissible Water Pressure

The water pressure must be at least 1bar (= 10N/cm2 = 0.1MPa), maxi- mum 10bar (= 100N/cm2 = 1MPa).

•In the case of more than 10bar: Connect a pressure-reducing valve upstream.

•In the case of less than 1bar: Unscrew the intake hose on the unit side on the inlet solenoid valve and remove the flow regulator (to do this, remove the filter with pointed pliers and remove the rubber washer behind). Replace the filter.

47

Image 47

Contents ÖKO-LAVAMAT 74740 update Practical use of the unit Dear customerPlease read this user information carefully To any subsequent owners of the unitContents What to do if Remedying FaultsPage Correct Use SafetyBefore Putting into Operation for the First Time General Safety Child SafetyFor polyoxymethylene, e.g. plastic clips DisposalEnvironment Tips Dispose the packing materialDrawer for Washing Powder and Care Agent Unit DescriptionFront View Program Selector Control PanelWool WOLLE, LAINE/ P Handwash Shorter washing cycle for slightly dirty washing Come effective at higher temperaturesAdditional Program Buttons Minutes. This is followed automatically by the main washConsumption Values and Time Requirements Water Protection Aqua Control What Does Update Mean?Sort and Prepare the Washing Before the First WashPrepare the Washing Cycle Washing Types and Care Codes Water Softener How much washing detergent and care agent?After the Washing Program Ends Run a Washing CycleBrief Instructions Tables Setting the Washing ProgramPer minute Change Spin Speed / Select Rinse HoldRevolutions Soaking Duration Set the Delay Timer/Soaking DurationAdd the Washing Opening and Closing the Filling DoorOr for water softener If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Compartment for pre-wash agent/soaking agentIf the time preselection is set Start the Washing ProgramIs pressed Multidisplay Completion of the Washing ProgramProgram sequence display Change the Spin Speed Changing a Washing ProgramChanging or aborting a program Select the Additional ProgramWashing Cycle Ended/Remove Washing Washing Program TablesType Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumBefore cleaning the drain pump Cleaning the drain pumpWhat to do if Remedying FaultsRINSE+ SPÜLEN+ Repasser Rinse Spülen If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washingCarry Out an Emergency Emptying Operation Set Additional Rinse When all the washing solution has drained offCancel Additional Rinse Additional Rinse RINSE+/SPÜLEN+/RINCAGE+Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety FeatureSafety Instructions for Installation Setting up and connection instructionsTransporting the Unit Setting Up the UnitRemove the Transport Safeguard When transporting the unit with a sack trolley Close off the hole with the plug cap G Firmly pull both hose holders off the unitSetting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Measurements in mm Technical DataDimensions Delivery Heads over 1mSchweiz Suisse Svizzera Page Page Index When do you incur costs even during the warranty period? ServiceAEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG