AEG 74740 manual Start the Washing Program, Is pressed, If the time preselection is set

Page 24

Instructions for use

Start the Washing Program

01. Check that the water valve is open.

2.Start the washing program: Press the button

START/PAUSE. The washing program is started or it starts after the set time expires.

3	The filling door is not correctly closed if, when the button START/PAUSE
	is pressed,

– the indicator DOOR (TÜR, PORTE) flashes red

– the fault code E40 in the multidisplay flashes

– and the indicator MAIN WASH (HAUPTWÄSCHE, LAVAGE) flashes.

In this case, press the filling door firmly closed and again press the but- ton START/PAUSE.

If the time preselection is set:

A set time preselection runs and the remaining time until the program start is displayed (in each case in full hours, e.g. 5h). During this time you can load washing or change/abort the time preselection.

• Load washing: Press the button START/PAUSE. The filling door can be opened. Next, close the door and again press the button START/ PAUSE.

• Change or abort time preselection: Press the button DELAY TIMER (ZEITVORWAHL, DEPART DIFFERE) as often as necessary until the re- quired time is displayed; when the program run time is displayed (dis- play in minutes, e.g.126), the washing program starts without delay.

24

Image 24

Contents ÖKO-LAVAMAT 74740 update Dear customer Please read this user information carefullyTo any subsequent owners of the unit Practical use of the unitContents Remedying Faults What to do ifPage Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General SafetyDisposal Environment TipsDispose the packing material For polyoxymethylene, e.g. plastic clipsUnit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program SelectorWool WOLLE, LAINE/ P Handwash Come effective at higher temperatures Additional Program ButtonsMinutes. This is followed automatically by the main wash Shorter washing cycle for slightly dirty washingConsumption Values and Time Requirements What Does Update Mean? Water Protection Aqua ControlBefore the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerRun a Washing Cycle Brief InstructionsAfter the Washing Program Ends Setting the Washing Program TablesChange Spin Speed / Select Rinse Hold RevolutionsPer minute Set the Delay Timer/Soaking Duration Soaking DurationOpening and Closing the Filling Door Add the WashingIf using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent/soaking agent Or for water softenerStart the Washing Program Is pressedIf the time preselection is set Completion of the Washing Program Program sequence displayMultidisplay Changing a Washing Program Changing or aborting a programSelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingType Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorCleaning the drain pump Before cleaning the drain pumpRemedying Faults What to do ifRINSE+ SPÜLEN+ Repasser Rinse Spülen If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Cancel Additional RinseAdditional Rinse RINSE+/SPÜLEN+/RINCAGE+ Set Additional RinseChild Safety Feature Setting the Child SafetyFeature Cancelling the Child Safety FeatureSetting up and connection instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Close off the hole with the plug cap GPrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Measurements in mmSchweiz Suisse Svizzera Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG