AEG 74740 manual Run a Washing Cycle, Brief Instructions, After the Washing Program Ends

Page 18

Instructions for use

Run a Washing Cycle

Brief Instructions

A washing cycle is run in the following steps:

01. Set the correct washing program:

Set the program and temperature with the program selector

Set any additional program(s)

2.Change the spin speed if necessary / select RINSE HOLD (SPÜLSTOPP, SANS ESSOR.).

3.Set DELAY TIMER (ZEITVORWAHL, DEPART DIFFERE) if necessary.

4.Open the filling door and fill with washing.

5.Close the filling door.

6.Add washing detergent/care agent.

7.Start the washing programme with the START/PAUSE button.

After the Washing Program Ends:

Attention! If the washing cycle ended with Rinse Hold, before opening the filling door carry out PUMP (PUMPEN, VIDANGE), SPIN (SCHLEUDERN, ESSORAGE) or SHORT SPIN (SCHONSCHLEUDERN, ESSOR. DELICAT).

8.Open the filling door and remove the washing.

9.Switch off the washing machine: Set the program selector to OFF (AUS, ARRET).

18

Image 18
Contents ÖKO-LAVAMAT 74740 update To any subsequent owners of the unit Dear customerPlease read this user information carefully Practical use of the unitContents Remedying Faults What to do ifPage Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General SafetyDispose the packing material DisposalEnvironment Tips For polyoxymethylene, e.g. plastic clipsUnit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program SelectorWool WOLLE, LAINE/ P Handwash Minutes. This is followed automatically by the main wash Come effective at higher temperaturesAdditional Program Buttons Shorter washing cycle for slightly dirty washingConsumption Values and Time Requirements What Does Update Mean? Water Protection Aqua ControlBefore the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerRun a Washing Cycle Brief InstructionsAfter the Washing Program Ends Setting the Washing Program TablesChange Spin Speed / Select Rinse Hold RevolutionsPer minute Set the Delay Timer/Soaking Duration Soaking DurationOpening and Closing the Filling Door Add the WashingCompartment for pre-wash agent/soaking agent If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Or for water softenerStart the Washing Program Is pressedIf the time preselection is set Completion of the Washing Program Program sequence displayMultidisplay Select the Additional Program Changing a Washing ProgramChanging or aborting a program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingType Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorCleaning the drain pump Before cleaning the drain pumpRemedying Faults What to do ifRINSE+ SPÜLEN+ Repasser Rinse Spülen If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Additional Rinse RINSE+/SPÜLEN+/RINCAGE+ When all the washing solution has drained offCancel Additional Rinse Set Additional RinseFeature Child Safety FeatureSetting the Child Safety Cancelling the Child Safety FeatureSetting up and connection instructions Safety Instructions for InstallationWhen transporting the unit with a sack trolley Setting Up the UnitRemove the Transport Safeguard Transporting the UnitFirmly pull both hose holders off the unit Close off the hole with the plug cap GPrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Delivery Heads over 1m Technical DataDimensions Measurements in mmSchweiz Suisse Svizzera Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG