AEG 74740 manual Repasser

Page 36

Instructions for use

Problem

Possible Cause

Remedy

 

The screw connection on the

Tighten the intake hose

 

intake hose is leaky.

screw connection.

 

The drainage hose is leaky.

Check the drainage hose and

 

replace it if necessary.

 

 

 

The washing solution pump

Close cover correctly.

 

cover is not correctly closed.

 

 

Water runs out under

Washing stuck in the filling

Stop the program, remove

the washing machine.

washing from the filling

door.

 

door, start a new program.

 

 

 

 

Shut the emergency drain

 

The emergency drain hose is

hose off properly (see section

 

"Performing an Emergency

 

not properly shut off or it is

 

Drain"). Call your after-sales

 

not water-tight.

 

service if the emergency

 

 

 

 

drain hose is not water-tight.

 

 

 

Fault code EF0

 

 

appears.

 

Turn off the tap, then re-

The drain pump for the

 

The Aqua Control anti-flood

move the plug from the

washing machine runs

system has been activated.

mains and inform Customer

constantly - even when

 

Service.

the appliance is

 

 

switched off.

 

 

Conditioner not added,

Softener insert in the com-

Clean the detergent drawer

compartment æfor

partment for care agent not

and firmly attach the sof-

care agent full of wa-

correctly attached or is

tener insert.

ter.

blocked.

 

 

 

Pay attention to the maxi-

 

 

mum filling quantity (see

Washing heavily

Too mush washing probably

Program Tables). For easy-

care textiles, select the pro-

creased.

put in.

gram EASY IRON

 

 

 

 

(LEICHTBÜGELN, FACILE A

 

 

REPASSER).

 

 

 

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents ÖKO-LAVAMAT 74740 update Dear customer Please read this user information carefullyTo any subsequent owners of the unit Practical use of the unitContents Remedying Faults What to do ifPage Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General SafetyDisposal Environment TipsDispose the packing material For polyoxymethylene, e.g. plastic clipsUnit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program SelectorWool WOLLE, LAINE/ P Handwash Come effective at higher temperatures Additional Program ButtonsMinutes. This is followed automatically by the main wash Shorter washing cycle for slightly dirty washingConsumption Values and Time Requirements What Does Update Mean? Water Protection Aqua ControlBefore the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerRun a Washing Cycle Brief InstructionsAfter the Washing Program Ends Setting the Washing Program TablesChange Spin Speed / Select Rinse Hold RevolutionsPer minute Set the Delay Timer/Soaking Duration Soaking DurationOpening and Closing the Filling Door Add the WashingIf using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent/soaking agent Or for water softenerStart the Washing Program Is pressedIf the time preselection is set Completion of the Washing Program Program sequence displayMultidisplay Changing a Washing Program Changing or aborting a programSelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingType Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Cleaning and Care Washing Detergent DrawerWashing Drum Filling Door Cleaning the drain pump Before cleaning the drain pumpRemedying Faults What to do ifRINSE+ SPÜLEN+ Repasser Rinse Spülen If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Cancel Additional RinseAdditional Rinse RINSE+/SPÜLEN+/RINCAGE+ Set Additional RinseChild Safety Feature Setting the Child SafetyFeature Cancelling the Child Safety FeatureSetting up and connection instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Close off the hole with the plug cap GPrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Measurements in mmSchweiz Suisse Svizzera Page Page Index Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG
Top Page Image Contents