AEG 82730 manual Completion of the Washing Program, Washing Cycle Ended/Remove Washing

Page 24

Instructions for use

Completion of the Washing Program

 

Program Sequence Display

 

Before the start, the program steps to be carried out

 

are displayed by the program sequence display. The

 

 

 

 

 

 

 

 

 

current program step is displayed during the washing

 

 

 

 

 

 

 

 

 

program.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Multi-Display

 

 

 

 

 

 

 

 

 

 

 

 

The expected remaining time (in minutes) is

 

 

 

 

 

shown up to the program end in the multi-

 

 

 

display.

3

With automatic program adaptation by the controller of the washing

 

machine, (quantity of washing, type of washing, imbalance recognition,

special rinse etc.) it is possible to stop or correct the counting of the re- maining run time.

Change the Spin Speed

During the washing program, the spin speed can still be changed or RINSE HOLD (GEEN CENTR., SANS ESSOR.) can be set.

Other settings cannot be changed.

Abort Program

0To abort the washing program early, turn the program selector to OFF (UIT, ARRET).

3

The washing program can be interrupted at any time with the START/

 

PAUSE (START/PAUZE, MARCHE/PAUSE) button and can be continued

by pressing the button again.

Washing Cycle Ended/Remove Washing

After a washing program has ended, END (EINDE, FIN) lights up on the program sequence display.

•A crease protection phase of approx. 30 minutes follows at the end of the program if program EASY IRON (STRIJKVRIJ, SANS REPASSAGE) had been selected. The multidisplay also shows the remaining time and the display END (EINDE, FIN) is illuminated. You can open the fill- ing door and take the washing out at any time during the crease pro- tection phase..

•If you selected RINSE HOLD (GEEN CENTR., SANS ESSOR.), the indica- tor next to the button START/PAUSE (START/PAUZE, MARCHE/ PAUSE) flashes.

24

Page 23 Page 25
Image 24
Page 23 Page 25
Contents ÖKO-LAVAMAT 82730 update Dear customer Contents Solution Cooling What to do ifPage Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General SafetyDisposal Environment TipsDispose the packing material For polyoxymethylene, e.g. plastic clipsUnit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program SelectorWool WOL, LAINE/ P Handwash Program Silk ZIJDE, SOIE/ P Handwash ProgramAdditional Program Buttons Consumption Values and Time Requirements What Does Update Mean? Water Protection Aqua Control + Aqua AlarmRunning Time Display Before the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerRun a Washing Cycle Brief InstructionsSet the Washing Program After the Washing Program EndsChange Spin Speed / Select Rinse Hold If necessary, change the spin speed for the finalRevolutions Per minuteSet the Delay Timer Opening and Closing the Filling DoorOff Red The door is openAdd the Washing For information on the correct preparation of the washingIf using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent/soaking agent Or for water softenerStart the Washing Program If the time preselection is setCompletion of the Washing Program Washing Cycle Ended/Remove WashingLights up, too much washing detergent was used Program Tables WashingDelicates Soaking Separate Conditioning/Starching/Impregnating Separate SpinCleaning and Care Washing Detergent DrawerWashing Drum Filling DoorCleaning the drain pump Before cleaning the drain pumpRemedying Faults After remedying the fault, press the buttonWhat to do if Ter valve, remove the filter Fault code 1 ap Tighten the intake hose Head 1m from units floor If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Emergency Unlocking of the Filling DoorAid of the emergency unlocking facility Gency unlocking and remove the plug from the mainsNo additional rinse is set when the unit is delivered Additional Rinse RINSE+To rinse with more water Set Additional RinseSolution Cooling Cancel Additional RinseSet the Solution Cooling Additional Rinse and Solution Cooling Cancel the Solution CoolingSetting the Program Saving Function Canceling the Program Saving FunctionProgram Saving Child Safety Feature Setting the Child SafetyFeature Cancelling the Child Safety FeatureSetting up and connection instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Close off the hole with the plug cap GPrepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Measurements in mmCustomer services BelgiumIndex Service When do you incur costs even during the warranty period?AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

82730 specifications

The AEG 82730 is a powerful and versatile appliance designed to enhance the cooking experience in modern kitchens. Known for its exceptional design and innovative technologies, this kitchen appliance combines functionality with style, making it an ideal choice for both amateur and professional chefs.

One of the main features of the AEG 82730 is its multifunctional capabilities. It serves as both an oven and a microwave, allowing users to switch between various cooking methods effortlessly. Its impressive range of cooking options includes baking, grilling, and even steaming, providing versatility for a wide array of recipes.

The appliance boasts a sleek, user-friendly interface that includes a digital display and intuitive controls. These features make it easy for users to navigate through different settings and programs. The touch-sensitive controls further enhance user experience, ensuring that the cooking process is as seamless as possible.

The AEG 82730 incorporates advanced heating technologies such as the innovative ProCombi technology, which combines hot air circulation with microwave energy. This allows dishes to be cooked evenly and quickly, while retaining moisture and flavor. The result is a perfectly cooked meal that maintains its original taste and texture, reducing the need for added fats and oils.

In terms of energy efficiency, the AEG 82730 is designed with sustainability in mind. The appliance is equipped with an Eco mode that optimizes power consumption during use, helping to reduce the overall energy footprint. This is an important consideration for environmentally-conscious consumers who want to minimize their impact on the planet.

Another notable characteristic of the AEG 82730 is its generous cooking capacity. With ample space to accommodate various dish sizes, users can effortlessly prepare meals for families or gatherings. The interior is also designed for easy cleaning, featuring a sleek surface that resists stains and food buildup.

Safety features are paramount in the design of the AEG 82730. The appliance comes equipped with a child lock option, ensuring that little hands cannot accidentally activate it. Additionally, the cool-touch door prevents burns, providing peace of mind for families with children.

In summary, the AEG 82730 stands out for its multifunctionality, advanced cooking technologies, user-friendly controls, energy efficiency, and safety features. This appliance is an excellent investment for anyone seeking to elevate their culinary skills while enjoying the convenience of modern cooking solutions.
Top Page Image Contents