AEG 70730 manual Consumption Values and Time Requirements

Page 13

Instructions for use

Consumption Values and Time Requirements

The values for selected programs in the following tables were deter- mined under normal conditions. However, there is a helpful orientation aid for domestic operation.

Program Selector/

Filling Quantity

Water

Energy

Time

Temperature

in kg

in Litres

in kWh

in Minutes

COTTONS/LINEN 95

 

 

 

 

(WITTE/BONTE WAS,

5

45

1.70

144

BLANC/COULEURS)

 

 

 

 

COTTONS/LINEN 601)

5

42

0.94

129

(WITTE/BONTE WAS,

BLANC/COULEURS)

 

 

 

 

COTTONS/LINEN 40

 

 

 

 

(WITTE/BONTE WAS,

5

49

0.60

128

BLANC/COULEURS)

 

 

 

 

EASY-CARES 40

 

 

 

 

(KREUKHERSTELLEND,

2.5

54

0.50

81

DEFROISSABLE)

 

 

 

 

DELICATES 30

2.5

50

0.30

54

(FIJNE WAS, LINGE DELICAT)

 

 

 

 

WOOLLENS/ P (Handwash) 30

1

48

0.20

55

(WOL, LAINE)

 

 

 

 

 

 

 

 

 

1)Note: Program setting for a test in accordance with EN 60 456. The consumption values can deviate from the stated values depending on the water pressure, hardness, inlet temperature, room temperature, type and quantity of washing, the washing powder/liquid used, fluctuations in the mains voltage and selected additional functions.

13

Image 13
Contents ÖKO-LAVAMAT 70730 update Tel /3630444 Dear customerContents What to do if Remedying FaultsContents Before Putting into Operation for the First Time SafetyCorrect Use General Safety Child SafetyEnvironment Tips DisposalDispose the packing material Dispose the old applianceFront View Unit DescriptionDrawer for Washing Powder and Care Agent Program Selector Control PanelWoollens WOL, LAINE/P Handwash EASY-CARES KREUKHERSTELLEND, DefroissablePRE Wash VOORWAS, Prelav Additional Program ButtonsConsumption Values and Time Requirements Water Protection Aqua Control What Does Update Mean?Prepare the Washing Cycle Before the First WashSort and Prepare the Washing Washing Types and Care Codes Water Softener How much washing detergent and care agent?Water Hardness Details Brief Instructions Run a Washing CycleAfter the Washing Program Ends Set the Washing Program Change Spin Speed / Select Rinse Hold Set the Delay Timer/Soaking DurationThis run time is comprised as follows Soaking DurationAdd the Washing Opening and Closing the Filling DoorAdd Washing Detergent/Care Agent If using Liquid Detergent/TabsCompartment for pre-wash agent/soaking agent Or for water softenerIf the time preselection is set Start the Washing ProgramChanging a Washing Program Completion of the Washing ProgramProgram Sequence Display Multi-DisplayChange the Spin Speed Select the Additional ProgramWashing Cycle Ended/Remove Washing Washing Program TablesEASY-CARES PRE Wash Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsRINCAGE+ flashes Water Sans Repassage Washing detergent If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution PumpEmergency Unlocking of the Filling Door Additional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancel Additional RinseSet Additional Rinse Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection InstructionsRemove the Transport Safeguard Setting Up the UnitWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Page Page Index When do you incur costs even during the warranty period? Service