AEG 70730 manual Cleaning and Care, Washing Detergent Drawer

Page 31

Instructions for use

Cleaning and Care

Control Panel

Attention! For cleaning panels and control parts, do not use furniture polish or any aggressive cleaning agents.

0Wipe off control panels with a damp cloth. Use warm water to do this.

Washing Detergent Drawer

The washing detergent drawer should be cleaned from time to time.

01. Pull out the washing detergent drawer as far as it will go.

2.Remove the washing detergent drawer with a firm pull.

3.Remove the softener insert from

the middle compartment.

4. Clean the softener insert under running water.

5. Clean the compartments from the rear with warm water.

It is best to use a bottle brush.

6.Push on the softener insert as far as it will go so that it is secure.

31

Image 31

Contents ÖKO-LAVAMAT 70730 update Tel /3630444 Dear customerContents What to do if Remedying FaultsContents Before Putting into Operation for the First Time SafetyCorrect Use General Safety Child SafetyDispose the old appliance DisposalEnvironment Tips Dispose the packing materialFront View Unit DescriptionDrawer for Washing Powder and Care Agent Program Selector Control PanelWoollens WOL, LAINE/P Handwash EASY-CARES KREUKHERSTELLEND, DefroissablePRE Wash VOORWAS, Prelav Additional Program ButtonsConsumption Values and Time Requirements Water Protection Aqua Control What Does Update Mean?Prepare the Washing Cycle Before the First WashSort and Prepare the Washing Washing Types and Care Codes Water Softener How much washing detergent and care agent?Water Hardness Details Brief Instructions Run a Washing CycleAfter the Washing Program Ends Set the Washing Program Change Spin Speed / Select Rinse Hold Set the Delay Timer/Soaking DurationThis run time is comprised as follows Soaking DurationAdd the Washing Opening and Closing the Filling DoorOr for water softener If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Compartment for pre-wash agent/soaking agentIf the time preselection is set Start the Washing ProgramMulti-Display Completion of the Washing ProgramChanging a Washing Program Program Sequence DisplayChange the Spin Speed Select the Additional ProgramWashing Cycle Ended/Remove Washing Washing Program TablesEASY-CARES PRE Wash Separate Rinse Separate Conditioning/Starching/ImpregnatingSeparate Spin Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsRINCAGE+ flashes Water Sans Repassage Washing detergent If foam is still visible after the final rinse If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If there are still grey stains on the washingCarry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution PumpEmergency Unlocking of the Filling Door Additional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancel Additional RinseSet Additional Rinse Setting the Child Safety Feature Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection InstructionsTransporting the Unit Setting Up the UnitRemove the Transport Safeguard When transporting the unit with a sack trolleyFirmly pull both hose holders off the unit Setting Up on a Concrete Pedestal Prepare the Installation LocationSetting Up on a Vibrating floor Compensate for Floor Unevenness Water Connection Electrical ConnectionPermissible Water Pressure Water Inflow Water Drainage into a Siphon Water DrainageDraining the water into a basin Dimensions Technical DataDelivery Heads over 1m Page Page Index When do you incur costs even during the warranty period? Service