AEG 70730 manual Washing detergent

Page 36

Instructions for use

	Problem	Possible Cause	Remedy
	Washing detergent	Water valve not fully opened.	Open the water valve fully.
	Washing detergent	Filter in the screw connec-	Close the water valve.
	residues form in the	Filter in the screw connec-	Close the water valve.
	washing detergent	tion of the intake hose on	Unscrew the intake hose
	drawer.	the water valve or on the	from the water tap and from
		unit is blocked.	the unit. Clean the filter.
	The rinsing water is	The cause is probably a	No negative influence on the
	The rinsing water is	detergent with a high silicate	rinsing result, use liquid
	murky.	detergent with a high silicate	rinsing result, use liquid
	murky.	content.	detergent if necessary.
		content.	detergent if necessary.
	The corresponding dis-
	play does not light up	The selected additional pro-
	when one of the addi-	gram cannot be combined	Make another selection.
	tional program but-	with the set program.
	tons is pressed.

36

Image 36

Contents ÖKO-LAVAMAT 70730 update Dear customer Tel /3630444Contents Remedying Faults What to do ifContents Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General SafetyDisposal Environment TipsDispose the packing material Dispose the old applianceUnit Description Front ViewDrawer for Washing Powder and Care Agent Control Panel Program SelectorEASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P HandwashAdditional Program Buttons PRE Wash VOORWAS, PrelavConsumption Values and Time Requirements What Does Update Mean? Water Protection Aqua ControlBefore the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerWater Hardness Details Run a Washing Cycle Brief InstructionsAfter the Washing Program Ends Set the Washing Program Set the Delay Timer/Soaking Duration Change Spin Speed / Select Rinse HoldSoaking Duration This run time is comprised as followsOpening and Closing the Filling Door Add the WashingIf using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent/soaking agent Or for water softenerStart the Washing Program If the time preselection is setCompletion of the Washing Program Changing a Washing ProgramProgram Sequence Display Multi-DisplaySelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingEASY-CARES PRE Wash Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifRINCAGE+ flashes Water Sans Repassage Washing detergent If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained offEmergency Unlocking of the Filling Door Cancel Additional Rinse Additional Rinse RINSE+/SPOELEN+/RINCAGE+Set Additional Rinse Child Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Page Page Index Service When do you incur costs even during the warranty period?