AEG 70730 manual Change Spin Speed / Select Rinse Hold, Set the Delay Timer/Soaking Duration

Page 20

STARTTIJDKEUZE DEPART DIFFERE

LOOPTIJD TEMPS RESTANT

Instructions for use

Change Spin Speed / Select Rinse Hold

0If necessary, change the spin speed for the final

spin / select RINSE HOLD (GEEN CENTR., SANS ESSOR.): Press the button Spin speed/RINSE HOLD (GEEN CENTR., SANS ESSOR.) as often as necessary until the display for the required spin speed (or of RINSE HOLD/GEEN CENTR., SANS ESSOR.) lights up.

If RINSE HOLD (GEEN CENTR., SANS ESSOR.) is

selected, the washing remains in the last rinsing water and is not spun.

3If you do not change the spin speed, the final spin is automatically adapted depending on the washing program:

–COTTONS/LINEN

(WITTE/BONTE WAS, BLANC/COULEURS)

–EASY-CARES/EASY IRON (KREUKHERSTELLEND, DEFROISSABLE/ STRIJKVRIJ, SANS REPASSAGE)

–DELICATES

(FIJNE WAS, LINGE DELICAT)

–WOOLLENS

(WOL, LAINE)/P (Handwash)

1000 revolutions per minute

900revolutions per minute

700revolutions per minute

900revolutions per minute

The speed of the intermediate spin depends on the selected program and cannot be changed.

Set the Delay Timer/Soaking Duration

Delay Timer

The button DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) allows the start of a washing program to be advanced by 1 to a maximum of

19 hours.

0 To do this, press the button DELAY TIMER (STARTTIJDKEUZE, DEPART DIFFERE) as often as necessary until the required start delay is

shown in the multidisplay, e. g.12h in the form for a program start delay of 12 hours.

If19h is shown and you press again, 0h and afterwards the run time of the set washing program appears (display in minutes, e. g.129). In this state, the delay timer is not set.

20

Image 20

Contents ÖKO-LAVAMAT 70730 update Dear customer Tel /3630444Contents Remedying Faults What to do ifContents Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General SafetyDisposal Environment TipsDispose the packing material Dispose the old applianceDrawer for Washing Powder and Care Agent Unit DescriptionFront View Control Panel Program SelectorEASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P HandwashAdditional Program Buttons PRE Wash VOORWAS, PrelavConsumption Values and Time Requirements What Does Update Mean? Water Protection Aqua ControlSort and Prepare the Washing Before the First WashPrepare the Washing Cycle Washing Types and Care Codes Water Hardness Details How much washing detergent and care agent?Water Softener After the Washing Program Ends Run a Washing CycleBrief Instructions Set the Washing Program Set the Delay Timer/Soaking Duration Change Spin Speed / Select Rinse HoldSoaking Duration This run time is comprised as followsOpening and Closing the Filling Door Add the WashingIf using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent/soaking agent Or for water softenerStart the Washing Program If the time preselection is setCompletion of the Washing Program Changing a Washing ProgramProgram Sequence Display Multi-DisplaySelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingEASY-CARES PRE Wash Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifRINCAGE+ flashes Water Sans Repassage Washing detergent If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained offEmergency Unlocking of the Filling Door Set Additional Rinse Cancel Additional RinseAdditional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for InstallationSetting Up the Unit Remove the Transport SafeguardWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Technical DataDimensions Page Page Index Service When do you incur costs even during the warranty period?