AEG 70730 manual What to do if, Remedying Faults

Page 33

Instructions for use

What to do if ...

Remedying Faults

In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.

• If the fault code E10, E20 or E40 is shown in the multidisplay, you may be able to remedy the fault yourself (see Faults Table below).

After remedying the fault, press the button START/PAUSE (START/ PAUZE, MARCHE/PAUSE). If the fault code is shown again, inform Customer Service.

•In the case of all other displayed faults (E and number or letter), please inform the Customer Service and state the fault code.

	Problem	Possible Cause	Remedy
		The mains plug is not	Plug in the mains plug.
		plugged in.	Plug in the mains plug.
		plugged in.
		The fuse of the building's	Replace the fuse.
		wiring is not in order.	Replace the fuse.
		wiring is not in order.
	The washing machine	The filling door is not cor-	Close the filling door; the
	does not work.	The filling door is not cor-	Close the filling door; the
	does not work.	rectly closed.	lock must engage audibly.
		rectly closed.	lock must engage audibly.
		The button START/PAUSE	Press the button START/
		(START/ PAUZE, MARCHE/	PAUSE (START/ PAUZE,
		PAUSE) was not pressed for	MARCHE/PAUSE) until the
		long enough.	program begins.
	The filling door cannot		Cancel the child lock
	The filling door cannot	The child lock is set.	(see section „Child Safety
	be closed.	The child lock is set.	(see section „Child Safety
	be closed.		Feature").
			Feature").
	Fault code E40
	appears. The indicator	The filling door is not	Close the filling door cor-
	MAIN WASH (HOOFD-	correctly closed.	rectly. Restart the program.
	WAS, LAVAGE) flashes.

33

Image 33

Contents ÖKO-LAVAMAT 70730 update Tel /3630444 Dear customerContents What to do if Remedying FaultsContents Safety Before Putting into Operation for the First TimeCorrect Use General Safety Child SafetyEnvironment Tips DisposalDispose the packing material Dispose the old applianceUnit Description Front ViewDrawer for Washing Powder and Care Agent Program Selector Control PanelWoollens WOL, LAINE/P Handwash EASY-CARES KREUKHERSTELLEND, DefroissablePRE Wash VOORWAS, Prelav Additional Program ButtonsConsumption Values and Time Requirements Water Protection Aqua Control What Does Update Mean?Before the First Wash Prepare the Washing CycleSort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water SoftenerWater Hardness Details Run a Washing Cycle Brief InstructionsAfter the Washing Program Ends Set the Washing Program Change Spin Speed / Select Rinse Hold Set the Delay Timer/Soaking DurationThis run time is comprised as follows Soaking DurationAdd the Washing Opening and Closing the Filling DoorAdd Washing Detergent/Care Agent If using Liquid Detergent/TabsCompartment for pre-wash agent/soaking agent Or for water softenerIf the time preselection is set Start the Washing ProgramChanging a Washing Program Completion of the Washing ProgramProgram Sequence Display Multi-DisplayChange the Spin Speed Select the Additional ProgramWashing Cycle Ended/Remove Washing Washing Program TablesEASY-CARES PRE Wash Separate Conditioning/Starching/Impregnating Separate RinseSeparate Spin Washing Detergent Drawer Cleaning and CareFilling Door Washing DrumWhat to do if Remedying FaultsRINCAGE+ flashes Water Sans Repassage Washing detergent If the washing is grey and limescale forms in the drum If the washing result is not satisfactoryIf there are still grey stains on the washing If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation When all the washing solution has drained off Clean the Solution PumpEmergency Unlocking of the Filling Door Cancel Additional Rinse Additional Rinse RINSE+/SPOELEN+/RINCAGE+Set Additional Rinse Child Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Safety Instructions for Installation Setting UP and Connection InstructionsRemove the Transport Safeguard Setting Up the UnitWhen transporting the unit with a sack trolley Transporting the UnitFirmly pull both hose holders off the unit Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Page Page Index When do you incur costs even during the warranty period? Service