AEG 70730 manual Water Drainage into a Siphon, Draining the water into a basin

Page 50

Setting up and connection instructions

Water Drainage

The drainage hose can either be connected to a siphon or hung in a wash basin or bath tub.

Only original hoses may be used for extension purposes (max. 3m on the floor and then up to 80cm high). The Customer Service stocks hoses in lengths of 2.7 and 4m.

Attention! It is absolutely essential to install the drainage hose free of pinches.

Water Drainage into a Siphon

The grommet on the end of the hose fits all commonly used siphon types.

0 Secure the grommet/siphon connecting point with a hose clamp.

Draining the water into a basin

Attention!

–Small basins are not suitable for draining the water into them. Water could overflow!

–It is not permitted to submerge the

end of the drainage hose into the pumped-off water. Water could be sucked up into the hose!

–When hooked into a wash-basin or a

bath tub the drainage hose must be protected from slipping out of place by the supplied slip-on elbow. Other- wise the repelling power of the drain- ing water can press the hose out of the sink.

0 Fix the elbow to the water tap or to the wall with string.

50

Image 50

Contents ÖKO-LAVAMAT 70730 update Dear customer Tel /3630444Contents Remedying Faults What to do ifContents Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General SafetyDispose the packing material DisposalEnvironment Tips Dispose the old applianceDrawer for Washing Powder and Care Agent Unit DescriptionFront View Control Panel Program SelectorEASY-CARES KREUKHERSTELLEND, Defroissable Woollens WOL, LAINE/P HandwashAdditional Program Buttons PRE Wash VOORWAS, PrelavConsumption Values and Time Requirements What Does Update Mean? Water Protection Aqua ControlSort and Prepare the Washing Before the First WashPrepare the Washing Cycle Washing Types and Care Codes Water Hardness Details How much washing detergent and care agent?Water Softener After the Washing Program Ends Run a Washing CycleBrief Instructions Set the Washing Program Set the Delay Timer/Soaking Duration Change Spin Speed / Select Rinse HoldSoaking Duration This run time is comprised as followsOpening and Closing the Filling Door Add the WashingCompartment for pre-wash agent/soaking agent If using Liquid Detergent/TabsAdd Washing Detergent/Care Agent Or for water softenerStart the Washing Program If the time preselection is setProgram Sequence Display Completion of the Washing ProgramChanging a Washing Program Multi-DisplaySelect the Additional Program Change the Spin SpeedWashing Cycle Ended/Remove Washing Program Tables WashingEASY-CARES PRE Wash Separate Spin Separate Conditioning/Starching/ImpregnatingSeparate Rinse Cleaning and Care Washing Detergent DrawerWashing Drum Filling DoorRemedying Faults What to do ifRINCAGE+ flashes Water Sans Repassage Washing detergent If there are still grey stains on the washing If the washing result is not satisfactoryIf the washing is grey and limescale forms in the drum If foam is still visible after the final rinseCarry Out an Emergency Emptying Operation Clean the Solution Pump When all the washing solution has drained offEmergency Unlocking of the Filling Door Set Additional Rinse Cancel Additional RinseAdditional Rinse RINSE+/SPOELEN+/RINCAGE+ Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting UP and Connection Instructions Safety Instructions for InstallationWhen transporting the unit with a sack trolley Setting Up the UnitRemove the Transport Safeguard Transporting the UnitFirmly pull both hose holders off the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Delivery Heads over 1m Technical DataDimensions Page Page Index Service When do you incur costs even during the warranty period?