Use 15
press the Delay Start button once, the light relevant to the selected delay goes off;
press the Start/Pause button again to start the programme.
Important!
The selected delay can be changed only after selecting the washing programme again.
The door will be locked throughout the delay time. If you need to open the door, you must first set the washing machine to PAUSE by pressing the Start/Pause button and then wait some minutes. After you have closed the door, press the Start/Pause button again.
The Delay Start can not be selected with Drain programme.
Programme progress display
After having pressed the Start/Pause button, the «HOOFDWAS LAVAGE» (Functioning) pilot light comes on.
When the «HOOFDWAS LAVAGE» (Functioning) pilot light illuminates, this means that the machine is performing the washing cycle.
When the programme has finished, the «EINDE FIN DE CYCLE» (End) pilot light comes on.
When the appliance is performing additional rinses the «SPOELEN+ RINCAGE+» (Extra rinse) pilot light comes on.
HOOFDWAS LAVAGE EINDE FIN DE CYCLE
SPOELEN 
RINCAGE 
Select an additional rinse
This appliance is designed for saving water. However, for people with a very delicate skin (allergic to detergents) it may be necessary to rinse the laundry using an extra quantity of water (extra rinse).
Press simultaneously buttons «CENTRIFUG. ESSOR-
AGE» (Spin) and «VLEKKEN TACHES» (Stain) for some seconds: the light «SPOELEN+ RINCAGE+» (Extra
rinse) comes on in the programme progress display. This function stays permanently on. To remove it
press the same buttons again until the light «SPOELEN+ RINCAGE+» goes off.
Altering an option or a running programme
It is possible to change any option before the programme carries it out. Before you make any change, you must pause the washing machine by pressing the Start/Pause button.