AEG 54840 manual Care and cleaning

Page 27

Care and cleaning 27

4. Place a container close to the pump to collect any spillage.

5. Release the emergency emptying hose, place it in the container and remove its cap.

6.When no more water comes out,

unscrew the pump and remove it. Always keep a rag nearby to dry up spillage of water when removing the pump.

7. Remove any objects from the pump impeller by rotating it.

8. Put the cap back on the emergency emptying hose and place the latter back in its seat.

9. Screw the pump fully in.

10.Close the pump door.

Warning!

When the appliance is in use and depending on the programme selected

there can be hot water in the pump. Never remove the pump cover during a wash

cycle, always wait until the appliance has finished the cycle, and is empty. When replacing the cover, ensure it is securely retightened so as to stop leaks and young children being able to remove it.

Image 27

Contents

Lavamat Dear Customer Contents Preparing the wash cycle 20-23 Packaging materials Old machine Ecological hints Installation 36-39Safety information Prior to using for the first timeGeneral safety Installation Child Safety UseKeep all detergents in a safe place out of children’s reach Detergent dispenser drawer Product description«Start/Pause» button «Delay start» button Control panelFirst Use Pull out the dispenser drawer until it Daily UseLoad the laundry Measure out the detergent and the fabric softenerWool Handwash Silk Select the required programmeSelect the spin speed or the Rinse Hold option Synthetics SynthProgramme option buttons Select the Stain optionTo empty the water out Select the Delay Start Select the Extra Quick optionSelect the «Start/Pause» Altering an option or a running programme Delay Start can not be selected with Drain programmeProgramme progress display Select an additional rinseAt the end of the programme Cancelling a programmeInterrupting a programme Opening the door after the programme has startedExtra rinse Spin reduction Washing programmesSpin reduction Rinse Hold Extra rinse Spin reduction Rinse HoldPompen Vidange Opfrissen Rafraichir Programme informationsBefore loading the laundry TemperaturesPreparing the wash cycle Sorting out the laundryLaundry weights Following weights are indicativeRemoving stains Marked before starting the wash programme Detergents and additivesDegrees of water hardness Quantity of detergent to be usedEnergetic wash Delicate wash International wash code symbolsCare and cleaning Washing drum Door sealDrain pump Care and cleaning Emergency emptying out Water inlet filterFrost precautions Something not working Possible cause/SolutionMachine fills then empties immediately Possible cause/Solution Something not working Door included Techinical DataRinses Drain Spin Refresh Eco Consumption valueSpanner InstallationUnpacking Unscrew the three bolts with the suppliedPositioning and levelling Fitted on the door sealContaining the instruction booklet TConnect the water inlet hose supplied with Water inletWater drainage This appliance must be connected to a cold water supplyElectrical connection Permanent connectionConnect the machine to an earthed socket Ecological hints Enviroment concernsPackaging materials Old machineBelgium Declaration of Guarantee TermsBelgium Electrolux Home Products Consumer services Address for our consumer services departmentLuxembourg European GuaranteeSubject to change without notice 132 970 011 01