AEG 54840 manual Frost precautions

Page 29

Care and cleaning 29

Frost precautions

If the machine is installed in a place where the temperature could drop below 0°C, proceed as follows:

1.Close the water tap and unscrew the water inlet hose from the tap.

2.Place the end of the emergency emptying hose and that of the inlet hose in a bowl placed on the floor and let water drain out.

3.Screw the water inlet hose back on and reposition the emergency emptying hose after having put the cap on again.

By doing this, any water remaining in the machine is removed, avoiding ice forming and consequently damage to the appliance.

When you use the machine again, make sure that the ambient temperature is above 0°C.

Important! Every time you drain the water through the emergency emptying hose you must pour 2 litres of water into the main wash compartment of the detergent drawer and then run the drain programme. This will activate the ECO VALVE device avoiding that part of the detergent remains unused at next washing.

Image 29
Contents Lavamat Dear Customer Contents Preparing the wash cycle 20-23 Packaging materials Old machine Ecological hints Installation 36-39General safety Safety informationPrior to using for the first time Installation Keep all detergents in a safe place out of children’s reach Child SafetyUse Detergent dispenser drawer Product descriptionFirst Use «Start/Pause» button «Delay start» buttonControl panel Load the laundry Daily UseMeasure out the detergent and the fabric softener Pull out the dispenser drawer until itSelect the spin speed or the Rinse Hold option Select the required programmeSynthetics Synth Wool Handwash SilkTo empty the water out Programme option buttonsSelect the Stain option Select the «Start/Pause» Select the Delay StartSelect the Extra Quick option Programme progress display Delay Start can not be selected with Drain programmeSelect an additional rinse Altering an option or a running programmeInterrupting a programme Cancelling a programmeOpening the door after the programme has started At the end of the programmeSpin reduction Rinse Hold Washing programmesExtra rinse Spin reduction Rinse Hold Extra rinse Spin reductionPompen Vidange Opfrissen Rafraichir Programme informationsPreparing the wash cycle TemperaturesSorting out the laundry Before loading the laundryRemoving stains Laundry weightsFollowing weights are indicative Marked before starting the wash programme Detergents and additivesDegrees of water hardness Quantity of detergent to be usedEnergetic wash Delicate wash International wash code symbolsCare and cleaning Drain pump Washing drumDoor seal Care and cleaning Emergency emptying out Water inlet filterFrost precautions Something not working Possible cause/SolutionMachine fills then empties immediately Possible cause/Solution Something not working Door included Techinical DataRinses Drain Spin Refresh Eco Consumption valueUnpacking InstallationUnscrew the three bolts with the supplied SpannerContaining the instruction booklet Positioning and levellingFitted on the door seal Water drainage Water inletThis appliance must be connected to a cold water supply TConnect the water inlet hose supplied withConnect the machine to an earthed socket Electrical connectionPermanent connection Packaging materials Enviroment concernsOld machine Ecological hintsBelgium Declaration of Guarantee TermsBelgium Electrolux Home Products Consumer services Address for our consumer services departmentLuxembourg European GuaranteeSubject to change without notice 132 970 011 01