AEG 54840 manual Installation, Unpacking, Unscrew the three bolts with the supplied, Spanner

Page 36

36Installation

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

You are advised to keep all transit devices so that they can be refitted if the machine ever has to be transported again.

1.After removing all the packaging, carefully lay machine on it’s back to remove the polystyrene base from the bottom.

HEC0008

2.Remove the power supply cable and the draining hose from the hose holders on the rear of the appliance.

HEC0030

3. Unscrew the three bolts with the supplied

spanner

HEC0036

4. Slide out the relevant plastic spacers.

HEC0037

Image 36

Contents Lavamat Dear Customer Contents Preparing the wash cycle 20-23 Installation 36-39 Packaging materials Old machine Ecological hintsSafety information Prior to using for the first timeGeneral safety Installation Child Safety UseKeep all detergents in a safe place out of children’s reach Product description Detergent dispenser drawer«Start/Pause» button «Delay start» button Control panelFirst Use Daily Use Load the laundryMeasure out the detergent and the fabric softener Pull out the dispenser drawer until itSelect the required programme Select the spin speed or the Rinse Hold optionSynthetics Synth Wool Handwash SilkProgramme option buttons Select the Stain optionTo empty the water out Select the Delay Start Select the Extra Quick optionSelect the «Start/Pause» Delay Start can not be selected with Drain programme Programme progress displaySelect an additional rinse Altering an option or a running programmeCancelling a programme Interrupting a programmeOpening the door after the programme has started At the end of the programmeWashing programmes Spin reduction Rinse HoldExtra rinse Spin reduction Rinse Hold Extra rinse Spin reductionPompen Vidange Programme informations Opfrissen RafraichirTemperatures Preparing the wash cycleSorting out the laundry Before loading the laundryLaundry weights Following weights are indicativeRemoving stains Detergents and additives Marked before starting the wash programmeQuantity of detergent to be used Degrees of water hardnessInternational wash code symbols Energetic wash Delicate washCare and cleaning Washing drum Door sealDrain pump Care and cleaning Water inlet filter Emergency emptying outFrost precautions Possible cause/Solution Something not workingMachine fills then empties immediately Possible cause/Solution Something not working Techinical Data Door includedConsumption value Rinses Drain Spin Refresh EcoInstallation UnpackingUnscrew the three bolts with the supplied SpannerPositioning and levelling Fitted on the door sealContaining the instruction booklet Water inlet Water drainageThis appliance must be connected to a cold water supply TConnect the water inlet hose supplied withElectrical connection Permanent connectionConnect the machine to an earthed socket Enviroment concerns Packaging materialsOld machine Ecological hintsDeclaration of Guarantee Terms BelgiumAddress for our consumer services department Belgium Electrolux Home Products Consumer servicesEuropean Guarantee LuxembourgSubject to change without notice 132 970 011 01