Alliance Laundry Systems WF400, WF305, WF235, WF185, WF150 Important Safety Instructions

Page 11

2

Important Safety Instructions

WARNING

To reduce the risk of fire, electric shock, serious injury or death to persons when using your washer, follow these basic precautions:

1.Read all instructions before using the washer.

2.Refer to the GROUNDING INSTRUCTIONS in the installation Manual for the proper grounding of the washer.

3.Do not wash textiles that have been previously cleaned, washed, soaked, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances as they give off vapors that could ignite or explode.

4.Do not add gasoline, dry-cleaning solvents, or other flammable or explosive substances to the wash water. These substances give off vapors that could ignite or explode.

5.Under certain conditions, hydrogen gas may be produced in a hot water system that has not been used for two weeks or more. HYDROGEN GAS IS EXPLOSIVE. If the hot water system has not been used for such a period, before using a washing machine or combination washer-dryer, turn on all hot water faucets and let the water flow from each for several minutes. This will release any accumulated hydrogen gas. The gas is flammable, do not smoke or use an open flame during this time.

6.Do not allow children to play on or in the washer. This appliance is not intended for use by young children or infirm persons without supervision. Young children should be supervised to ensure that they do not play with the appliance.

7.Before the washer is removed from service or discarded, remove the door to the washing compartment.

8.Do not reach into the washer if the wash drum is moving. This is an imminently hazardous situation that, if not avoided, will cause severe personal injury or death.

9.Do not install or store the washer where it will be exposed to water and/or weather.

10.Do not tamper with the controls.

11.Do not repair or replace any part of the washer, or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user-repair instructions that the user understands and has the skills to carry out.

12.To reduce the risk of an electric shock or fire, DO NOT use an extension cord or an adapter to connect the washer to an electrical power source.

13.Use a washer only for its intended purpose, washing textiles.

14.ALWAYS disconnect the washer from the electrical supply before attempting any service. Disconnect the power cord by grasping the plug, not the cord.

15.Install the washer according to the INSTALLATION INSTRUCTIONS. All connections for water, drain, electrical power and grounding must comply with local codes and be made by licensed personnel when required.

16.To reduce the risk of fire, textiles which have traces of any flammable substances such as vegetable oil, cooking oil, machine oil, flammable chemicals, thinner, etc., or anything containing wax or chemicals such as in mops and cleaning cloths, must not be put into the washer. These flammable substances may cause the fabric to catch on fire.

17.Do not use fabric softeners or products to eliminate static unless recommended by the manufacturer of the fabric softener or product.

18.Keep washer in good condition. Bumping or dropping the washer can damage safety features. If this occurs, have washer checked by a qualified service person.

19.Replace worn power cords and/or loose plugs.

20.Be sure water connections have a shut-off valve and that fill hose connections are tight. CLOSE the shut-off valves at the end of each wash day.

11

Image 11
Contents Washer Extractors Page Contents Internal connections of the electrical heating  Page Build-up Model NumbersPage Safety Safety and Environmental InformationsDisposal of Unit EnvironmentalExplanation of Safety Messages Important Safety Instructions Page Operator Safety Technical data WF150, IWF150, IWF033, CWF033 Technical data and dimensionsDimensions WF150, IWF150, IWF033, CWF033 Technical data WF185, IWF185, IWF040, CWF185, CWF040 Dimensions WF185, IWF185, IWF040, CWF185, CWF040 Technical data WF235, IWF235, IWF055, CWF235, CWF055 Dimensions WF235, IWF235, IWF055, CWF235, CWF055 Technical data WF305, IWF305, IWF075, CWF305, CWF075 Dimensions WF305, IWF305, IWF075, CWF305, CWF075 Technical data WF400, IWF400, IWF090 Dimensions WF400, IWF400, IWF090 Directly on the ground Installation and Connection InstructionsSurface Anchoring on a metal base260 670 731 410 640 780 260 770 831 510 640 780 282 347 347 Model Water connectionWater drain Important Do not use fuses in place of a circuit breaker Electrical InstallationGrounding Instructions Connection label Main power connectionMachine Power Cable Connections Page Alternative Electric Heat Options Electrical Specifications WF150, IWF150, IWF033, CWF033Boiler Fed/Steam Heat Electric Heat Liters / 40 pounds Liters / 55 pounds Liters / 75 pounds Liters / 90 pounds Electrical Specifications WF400, IWF400, IWF090Connection of the liquid soap hoses Liquid soap connection optionWith an external tension 24V DC See Label Label With direct steam injection into the machine See Table Steam connectionInternal connections of the electrical heating Technical remarksEnd of day General maintenance Periodical maintenance Maintenance instruction of the machineAnnual maintenance Nameplate Location Contact InformationNameplate Replacement Parts Repair and after-sales service