Alliance Laundry Systems WF185, WF305, WF400, WF235, WF150 instruction manual Label

Page 43

4

Connection of a central operating panel for coin machines (option)

WARNING

To reduce the risk of electric shock, disconnect this appliance from the power supply before attempting any user maintenance. Turning the controls to the OFF position does not disconnect this appliance from the power supply.

At the backside above the main connectors, you find a printboard, to which the central operating panel for coin machines can be connected.

The right connectors form a potential free output contact as a result of which the operating panel detects when the machine is activated or not.

The left connectors receive the signal, by means of which a machine is chosen through the operating panel.

There are 3 different variations possible according to the output voltage of the operating panel. (See Labels 10, 11 and 12)

Label 10

Label 11

Label 12

A

IMPORTANT:

If a machine is equipped with this kind of printboard or if a printboard has been built in, the resistance of the cycle contact (A) may no longer be present on the main printboard. (See Label 13)

When this resistance is present, it has to be cut out of the main printboard.

Label 13

43

Image 43
Contents Washer Extractors Page Contents Internal connections of the electrical heating  Page Build-up Model NumbersPage Safety Safety and Environmental InformationsDisposal of Unit EnvironmentalExplanation of Safety Messages Important Safety Instructions Page Operator Safety Technical data WF150, IWF150, IWF033, CWF033 Technical data and dimensionsDimensions WF150, IWF150, IWF033, CWF033 Technical data WF185, IWF185, IWF040, CWF185, CWF040 Dimensions WF185, IWF185, IWF040, CWF185, CWF040 Technical data WF235, IWF235, IWF055, CWF235, CWF055 Dimensions WF235, IWF235, IWF055, CWF235, CWF055 Technical data WF305, IWF305, IWF075, CWF305, CWF075 Dimensions WF305, IWF305, IWF075, CWF305, CWF075 Technical data WF400, IWF400, IWF090 Dimensions WF400, IWF400, IWF090 Directly on the ground Installation and Connection InstructionsSurface Anchoring on a metal base260 670 731 410 640 780 260 770 831 510 640 780 282 347 347 Model Water connectionWater drain Important Do not use fuses in place of a circuit breaker Electrical InstallationGrounding Instructions Machine Power Cable Connections Main power connectionConnection label Page Boiler Fed/Steam Heat Electric Heat Electrical Specifications WF150, IWF150, IWF033, CWF033Alternative Electric Heat Options Liters / 40 pounds Liters / 55 pounds Liters / 75 pounds Liters / 90 pounds Electrical Specifications WF400, IWF400, IWF090Connection of the liquid soap hoses Liquid soap connection optionWith an external tension 24V DC See Label Label With direct steam injection into the machine See Table Steam connectionInternal connections of the electrical heating Technical remarksEnd of day General maintenance Periodical maintenance Maintenance instruction of the machineAnnual maintenance Nameplate Contact InformationNameplate Location Replacement Parts Repair and after-sales service