Adjusting the feet, Electrical connection

come out excessively wet. Therefore, follow the heights described in the figure.

•To prevent flowing of dirty water back into the machine and to allow for easy discharge, do not immerse the hose end into the dirty water or drive it in the drain more than 15 cm. If it is too long, cut it short.

•The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the machine.

•If the length of the hose is too short, use it by adding an original extension hose. Length of the hose may not be longer than 3.2 m.

To avoid water leak failures, the connection between the extension hose and the drain hose of the product must be fitted well with an appropriate clamp as not to come off and leak.

Adjusting the feet

A In order to ensure that the product operates more silent and vibration-free, it must stand level and balanced on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing and vibration problems.

A Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.

Electrical connection

Connect the product to a grounded outlet protected by a fuse complying with the values in the "Technical specifications" table. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

•Connection must comply with national regulations.

•Power cable plug must be within easy reach after installation.

•The voltage and allowed fuse or breaker protection are specified in the “Technical specifications” section. If the current value of the fuse or breaker in the house is less than 16 Amps, have a qualified electrician install a 16

Amp fuse.

•The specified voltage must be equal to your mains voltage.

•Do not make connections via extension cables or multi-plugs.

B Damaged power cables must be replaced by the Authorized Service Agents.

First use

Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation".

To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Before starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr. II). If the anti-limescale is in tablet form, put only one tablet into compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end.

1.Loosen the lock nuts on the feet by hand.

2.Adjust the feet until the product stands level and balanced.

3.Tighten all lock nuts again by hand.

C Use an anti-limescale suitable for the washing machines.

C Some water might have remained in the product due to the quality control processes

WNF 6461 AE20, WNF 6401 WE20, WNF 6441 AE20 specifications

Blomberg is renowned for its commitment to quality and innovation in the realm of home appliances, and the WNF 6441 AE20, WNF 6401 WE20, and WNF 6461 AE20 washing machines showcase this dedication perfectly. Each model comes with unique features that cater to different laundry needs, making them suitable for a variety of households.

The Blomberg WNF 6441 AE20 is a front-loading washing machine that is designed to offer efficiency along with a range of advanced features. One of its prominent characteristics is its A+++ energy rating, which ensures lower energy consumption without compromising on performance. The device is equipped with an intuitive control panel and a variety of washing programs, including quick wash and eco modes, allowing users to choose the best cycle for their laundry. Additionally, this model incorporates a specialized anti-allergy program that helps remove allergens, making it ideal for households with sensitive skin.

Moving on to the WNF 6401 WE20, this model is tailored for users seeking simplicity without sacrificing quality. It maintains a commendable energy rating and hosts multiple wash cycles suitable for different fabric types. One standout feature is its Large Capacity Drum, which provides enough space for larger loads, reducing the number of cycles needed. Furthermore, it includes a child lock for safety, ensuring peace of mind for families. The compact design also makes it an excellent option for homes with limited space.

The WNF 6461 AE20, meanwhile, combines advanced technology with stylish design. This model features a digital display that offers clear visibility of wash settings and remaining time. The ProSmart Inverter Motor, known for its quiet operation and durability, enhances the user experience by minimizing noise levels during washes. Additionally, the machine boasts a self-cleaning detergent drawer, which helps to maintain hygiene and performance over time. Its diverse selection of washing programs provides solutions for everything from delicates to heavily soiled items, making it versatile for various laundry needs.

All three models incorporate Blomberg's commitment to sustainability, employing advanced technology to reduce water and energy usage. Moreover, they are designed for user-friendliness, featuring ergonomic doors and easy-to-navigate controls. The build quality and efficiency of the WNF 6441 AE20, WNF 6401 WE20, and WNF 6461 AE20 position them as excellent choices for consumers looking for reliable and effective washing solutions that cater to both everyday and special laundry needs.