Changing the delay time

steps of three hours for the remainder (1, 2, 3, 6, 9, …24).

1.Open the loading door, place the laundry inside and fill detergent disperser.

2.Set the washing program, spin speed and, if required, select the auxiliary functions.

3.Press “Time Delay” button gradually to adjust the desired time.

4.Press “Start/Pause/Cancel” button.

The time delay will start to count down. The “:” in the middle of the displayed time delay will start flashing.

C More laundry may be loaded during the time delay period.

5.At the end of countdown process,

“:” will light up continuously, “Ready” light will go off and the relevant program follow-up light will come on according to the selected program.

If you want to change the time during the countdown:

1.Press “Start/Pause/Cancel” button.

“:” in the middle of the screen will stop flashing.

2.Press “Time Delay” button to adjust the desired time delay.

3.Press “Start/Pause/Cancel” button.

4.The “:” in the middle of the displayed time delay will start flashing.

Canceling the time delay

If you want to cancel the time delay countdown and start the program:

1.Press “Start/Pause/Cancel” button.

The “:” in the middle of the displayed time delay will stop flashing.

2.Press “Time Delay” button to decrease the time delay. “0:00” will appear on the display eventually.

3.Press “Start/Pause/Cancel” button to start the program.

Starting the Program

1.Press “Start/Pause/Cancel” button to start the program.

2.Program follow-up lamp “wash” showing the startup of the program will light up.

Progress of program

Progress of a running program is shown through the program follow-up indicator. At the beginning of every program step, the relevant indicator lamp will light up and light of the completed step will turn off. The indicator that is lit up at the far right of the series of indicator indicates the step that is being carried out.

C If the washer is not spinning, the automatic spin correction system has been activated due to an excessive unbalanced distribution of laundry in the drum.

Changing the selections after the program has started

Turning the cycle selector knob while the cycle selector is in a normal flow will not change the program.

Switching the washer to standby mode

Press “Start/Pause/Cancel” button momentarily to switch your washer to the standby mode. “Start/Pause/ Cancel” lamp will start flashing to indicate that the washer is switched to standby mode.

Selecting or canceling an auxiliary function in standby mode Auxiliary functions can be cancelled or selected in accordance with the step the program is at. For example, if your washer is on the main wash cycle or on the first rinse cycle, you may select extra rinse auxiliary function.

Super wash option may not be selected on any circumstances once the wash cycle begins.

Quick wash option may only be selected when your washer is on the main wash cycle.

C The spin speed which is selected first will keep on being valid even if the spin speed adjustment button is pressed during the wash cycle to change the spin speed. Press “Start/ Pause/Cancel” button and switch the