Blomberg WM 67121 NBL00 installation instructions Laundry in the machine. The laundry

Page 36

 

 

 

 

 

There may be an imbalance of

 

 

laundry in the machine. The laundry

 

 

in the drum may be tangled up

 

Intermediate spins may be

too much. Laundry should be

 

rearranged and re-spun. No spinning

 

skipped.

 

is performed when the laundry is

 

 

 

 

not evenly distributed in the drum

 

 

to prevent any damage to the

 

 

appliance and to its environment.

 

The amount and storage

Store detergents in a cool and dry

 

conditions of the detergent used

place. Do not keep them under high

Rinsing performance is

might not be appropriate.

temperatures.

 

 

poor.

 

 

Not using HE detergent

Use HE detergent.

 

 

 

 

 

Using excessive amount of

Reduce the amount of detergent.

 

detergent

 

 

 

 

 

 

Drain hose may be folded.

Check the drain hose and straighten

 

if necessary.

 

 

 

 

 

 

 

Clean the drain pump filter (See

 

Drain pump filter or drain itself

“User maintenance instructions” ). If

 

may be clogged.

the house drain pipes are clogged,

 

 

call a plumber for assistance.

 

Detergent (powder) may have

Dry the dispenser drawer before

 

been put in wet dispenser

 

putting in powder detergent.

 

drawer.

 

 

 

Detergent (powder) may have

Store detergent in a cool and dry

Detergent or softener

place. Do not keep them under high

gotten damp.

temperatures.

residue in the dispenser/

 

 

Dilute the softener by pouring some

Too much water

Softener may be too dense or

warm water on it (dilute up to max

remains in the softener

concentrated.

fill line).

compartment.

 

Water pressure might be low.

 

 

 

 

 

 

 

Detergent might be mixed with

Softener/bleach should not come

 

into contact with detergent when

 

the bleach/softener.

 

being added.

 

 

 

Feet might require adjustment.

Adjust the washer feet (See

 

“Levelling the Washer”).

 

 

 

 

 

 

Shipping bolts might not have

Remove the shipping bolts (See

 

“Removing Transport/Shipping

 

been removed.

 

Bolts”).

 

 

Washer vibrates, shakes

There may be a small amount of

Add more laundry to the drum for

even load distribution next time you

laundry in the drum.

or makes too much

operate the washer.

 

noise.

 

 

 

The drum may be overloaded or

Reduce the amount of laundry in the

 

the clothes may be distributed

drum or balance the load by hand

 

unevenly.

next time you operate the washer.

 

 

 

 

The appliance might be touching

Ensure that nothing touches the

 

a solid surface.

washer.

 

 

 

Strange noise in the

This is not a problem. Lapping

 

sound is normal at the end of the

It is not harmful to your washer.

drain pump.

drain operation.

 

 

 

 

 

 

Image 36
Contents Front-Loading Automatic Washer WM 67121 NBL00 Explanation of symbols Please read this guide firstThis guide will… Table of Contents Your Washer OverviewSpecifications Important Safety Instructions Page Page Installation Instructions Right Location InstallationInstallation Clearances Allowable Clearances for Undercounter Installation Allowable Clearances for Closet InstallationStacked Installation Removing packaging reinforcementLevelling the washer Electrical ConnectionGrounding Instructions Power supply and circuit Water Supply ConnectionInstallation Checklist DrainageTransportation Disposal InformationAppliance Disposal Packing DisposalOperating Instructions First UseLaundry Tips Before the first usePreparing the laundry Loading the washerDetergent Use Detergent QuantityDetergent Dispenser Water Consumption Liquid Chlorine Bleach CompartmentSelecting a program and operating your washer Control panelTurning the washer on Program cycle selectionProgram Cycle Selection Table Wash Cycles Special programsAuxiliary functions Options Time displayChanging the delay time Canceling the time delayStarting the Program Progress of programEnding the program through canceling Adding/removing laundry in standby modeChild-proof lock Door lockQuick instructions for daily use User maintenance instructions Cleaning detergent dispenserCleaning the door seal Cleaning the outer cabinet and control panelCleaning the water inlet strainers Cleaning the drain pump filterDescaling the washer Troubleshooting When a process is Washer will wait until there is a Automatic spin correction Laundry in the drum. No spinning Do not load the washer in excess Insufficient amount of detergent can Laundry in the machine. The laundry Be clogged Warranty Statement for the Blomberg Clothes Washers HOW to GET Service