Blomberg WM 67121 NBL00 installation instructions Automatic spin correction

Page 32

 

 

The automatic spin correction

 

 

system might have been activated

 

 

due to the unbalanced distribution of

 

 

the laundry in the drum.

 

 

 

It continuously spins.

There may be an imbalance of

The laundry in the drum may be

Remaining time does not

tangled up too much. Laundry

load in the drum.

count down.

should be rearranged and re-spun.

 

 

 

 

 

 

No spinning is performed when the

 

 

laundry is not evenly distributed in

 

 

the drum to prevent any damage to

 

 

the appliance and to its environment.

 

 

 

 

 

Use the recommended amount of

 

Using excessive amount of

HE detergent appropriate for water

 

detergent.

hardness, soil level and amount of

 

 

laundry.

 

Not using HE detergent

Use HE detergent.

Excess foaming occurs.

 

 

Detergent may have been stored

Store detergent in a cool and dry

 

improperly.

place.

 

 

 

 

Type of material being washed

 

 

(lace items will cause excessive

Reduce the amount of detergent for

 

foam due to their meshed

lace items.

 

structure).

 

 

 

Push “Start/Pause/Cancel”

 

 

button. Mix 2 cups of water

Washer is completely full

 

with 1-2 tablespoon of fabric

of suds/Suds coming

Not using HE detergent / Using

softener and pour it into

out of dispenser during

excessive amount of detergent

detergent dispenser. Push “Start/

operation.

 

Pause/Cancel” button again.

 

 

Use proper amount of HE detergent

 

 

next time you operate the washer.

 

 

Do not unload the washer.

 

 

Operate a quick wash cycle (e.g.

 

 

Delicates, Wools) without any

Load is still too soapy /

Not using HE detergent / Using

detergent. Add 1-2 tablespoon

Washer is full of suds at

of fabric softener into main

excessive amount of detergent

the end of program.

wash compartment of detergent

 

 

 

dispenser during water intake.

 

 

Use proper amount of HE detergent

 

 

next time you operate the washer.

 

 

 

 

Unbalance detection due to 1-2

Add more laundry (e.g. a few

Load is still too wet at

small items in the drum (uneven

additional towels) to the drum and

load distribution)

start a “Spin” or “Spin&Drain” cycle.

the end of program.

 

 

 

Poor spinning results due to

 

 

not using HE detergent / using

Use proper amount of HE detergent.

 

excessive amount of detergent

 

32

EN

Image 32
Contents Front-Loading Automatic Washer WM 67121 NBL00 This guide will… Explanation of symbolsPlease read this guide first Table of Contents Your Washer OverviewSpecifications Important Safety Instructions Page Page Installation Clearances Installation InstructionsRight Location Installation Allowable Clearances for Undercounter Installation Allowable Clearances for Closet InstallationStacked Installation Removing packaging reinforcementGrounding Instructions Levelling the washerElectrical Connection Power supply and circuit Water Supply ConnectionInstallation Checklist DrainageTransportation Disposal InformationAppliance Disposal Packing DisposalOperating Instructions First UseLaundry Tips Before the first usePreparing the laundry Loading the washerDetergent Dispenser Detergent UseDetergent Quantity Water Consumption Liquid Chlorine Bleach CompartmentSelecting a program and operating your washer Control panelTurning the washer on Program cycle selectionProgram Cycle Selection Table Wash Cycles Special programsAuxiliary functions Options Time displayChanging the delay time Canceling the time delayStarting the Program Progress of programEnding the program through canceling Adding/removing laundry in standby modeChild-proof lock Door lockQuick instructions for daily use User maintenance instructions Cleaning detergent dispenserCleaning the door seal Cleaning the outer cabinet and control panelCleaning the water inlet strainers Cleaning the drain pump filterDescaling the washer Troubleshooting When a process is Washer will wait until there is a Automatic spin correction Laundry in the drum. No spinning Do not load the washer in excess Insufficient amount of detergent can Laundry in the machine. The laundry Be clogged Warranty Statement for the Blomberg Clothes Washers HOW to GET Service