Blomberg WM 67121 NBL00 installation instructions Insufficient amount of detergent can

Page 35

 

 

If the water hardness is higher, using

 

 

insufficient amount of detergent can

 

Using insufficient amount of

cause the laundry to become stiff

 

detergent.

in time. Use appropriate amount of

 

 

detergent according to the water

 

 

hardness.

 

 

 

 

 

You may have added too much

 

 

softener beyond max fill line.

Clothes are stiff and/

 

 

 

The detergent dispenser might be

or do not smell like the

 

Softener being released early.

problematic. Water may be siphoned

fabric softener.

 

(pulling the softener into the washer

 

 

 

 

early) during the fill or rinse cycles.

 

 

 

 

 

There might be problems with the

 

 

water inlet valves.

 

 

 

 

The detergent may have

Softener should not come into

 

been placed into the wrong

 

contact with detergent / bleach

 

compartment; the detergent may

 

when being added.

 

be mixed with the softener.

 

 

 

 

 

 

 

Select the proper program and

 

A higher temperature might have

temperature according to the type

 

and soiling degree of the laundry

 

been selected.

 

(See “Laundry Tips” & “Program

 

 

 

 

Cycle Selection”).

 

 

 

 

 

Do not pour undiluted liquid

Color of the clothes

 

bleach onto laundry. Always pour

 

it into bleach compartment of the

faded.

 

Exposure of laundry to undiluted

dispenser prior to beginning of the

 

 

liquid chlorine bleach.

wash cycle .

 

 

 

 

 

Do not overfill the bleach

 

 

compartment. Fill up to max line at

 

 

the most.

 

Excessive laundry might have

Do not load the washer in excess.

 

been loaded in.

 

 

 

 

 

35

EN

Image 35
Contents Front-Loading Automatic Washer WM 67121 NBL00 This guide will… Explanation of symbolsPlease read this guide first Table of Contents Overview Your WasherSpecifications Important Safety Instructions Page Page Installation Clearances Installation InstructionsRight Location Installation Removing packaging reinforcement Allowable Clearances for Undercounter InstallationAllowable Clearances for Closet Installation Stacked InstallationGrounding Instructions Levelling the washerElectrical Connection Water Supply Connection Power supply and circuitDrainage Installation ChecklistPacking Disposal TransportationDisposal Information Appliance DisposalBefore the first use Operating InstructionsFirst Use Laundry TipsLoading the washer Preparing the laundryDetergent Dispenser Detergent UseDetergent Quantity Liquid Chlorine Bleach Compartment Water ConsumptionProgram cycle selection Selecting a program and operating your washerControl panel Turning the washer onProgram Cycle Selection Table Special programs Wash CyclesTime display Auxiliary functions OptionsProgress of program Changing the delay timeCanceling the time delay Starting the ProgramDoor lock Ending the program through cancelingAdding/removing laundry in standby mode Child-proof lockQuick instructions for daily use Cleaning the outer cabinet and control panel User maintenance instructionsCleaning detergent dispenser Cleaning the door sealCleaning the drain pump filter Cleaning the water inlet strainersDescaling the washer Troubleshooting When a process is Washer will wait until there is a Automatic spin correction Laundry in the drum. No spinning Do not load the washer in excess Insufficient amount of detergent can Laundry in the machine. The laundry Be clogged Warranty Statement for the Blomberg Clothes Washers HOW to GET Service