Blomberg WM 67121 NBL00 User maintenance instructions, Cleaning detergent dispenser

Page 26

7User maintenance instructions

A WARNING – Be sure to unplug the power cable before attempting maintenance or cleaning of your appliance to minimize the risk of electric shock.

Cleaning detergent dispenser

Remove any powder/liquid residue buildup in the dispenser drawer. To do this;

1.Press the dotted point on the siphon of the softener compartment and pull towards yourself until the it is removed from the dispenser.

3If more than a normal amount of water and softener/bleach mixture starts to gather in the dispenser compartments, dispenser must be cleaned.

2.Wash the dispenser drawer, liquid chlorine bleach container and siphon of softener under running warm water in a sink etc. Wear protective gloves or use an appropriate brush or sponge to avoid touching the detergent residues in the drawer when cleaning.

3.Replace the drawer into its housing after cleaning. Check if the siphon and container are in their original locations.

Cleaning the door seal

Be sure to check the rubber door seal after unloading your washer. Pull the seal back to search for any foreign objects. Residual metal objects such as pins and coins may form rust stains on rubber seal, and cause the seal to leak.

Wipe the stained areas with soapy water using a damp cloth. Then wipe with a dry cloth properly. Do not use an

abrasive scrubbing agent when cleaning rubber seal.

Cleaning the drum

Check the wash drum for any foreign objects after unloading your washer. Residual metal objects such as pins and coins may form rust stains on drum surface and your clothes. Do not use abrasive materials while cleaning the inner surface of the drum. Use soapy water with a damp cloth to wipe the inner surface, then dry it and leave the door open to let inside dry properly.

Sanitary cycle with extra rinse option should be used for monthly cleaning of drum. To carry out this procedure: First be sure that the drum is empty. Add 80ml of liquid chlorine bleach

to the bleach container in the right compartment of the dispenser. Select sanitary cycle, close the door and press “start/pause” button. At the completion of cycle, leave the door open for drying of drum interior.

Monthly cleaning of the washer is necessary for removal of bacteria and mold residues and prevention of unwanted odor in wash drum.

Cleaning the outer cabinet and control panel

When necessary:

Wipe the exterior panels of your washer with soapy water or mild detergent. Dry it with a soft cloth.

Use only a soft and damp cloth to clean the control panel.

26

EN

Image 26
Contents Front-Loading Automatic Washer WM 67121 NBL00 This guide will… Explanation of symbolsPlease read this guide first Table of Contents Your Washer OverviewSpecifications Important Safety Instructions Page Page Installation Clearances Installation InstructionsRight Location Installation Stacked Installation Allowable Clearances for Undercounter InstallationAllowable Clearances for Closet Installation Removing packaging reinforcementGrounding Instructions Levelling the washerElectrical Connection Power supply and circuit Water Supply ConnectionInstallation Checklist DrainageAppliance Disposal TransportationDisposal Information Packing DisposalLaundry Tips Operating InstructionsFirst Use Before the first usePreparing the laundry Loading the washerDetergent Dispenser Detergent UseDetergent Quantity Water Consumption Liquid Chlorine Bleach CompartmentTurning the washer on Selecting a program and operating your washerControl panel Program cycle selectionProgram Cycle Selection Table Wash Cycles Special programsAuxiliary functions Options Time displayStarting the Program Changing the delay timeCanceling the time delay Progress of programChild-proof lock Ending the program through cancelingAdding/removing laundry in standby mode Door lockQuick instructions for daily use Cleaning the door seal User maintenance instructionsCleaning detergent dispenser Cleaning the outer cabinet and control panelCleaning the water inlet strainers Cleaning the drain pump filterDescaling the washer Troubleshooting When a process is Washer will wait until there is a Automatic spin correction Laundry in the drum. No spinning Do not load the washer in excess Insufficient amount of detergent can Laundry in the machine. The laundry Be clogged Warranty Statement for the Blomberg Clothes Washers HOW to GET Service