Fisher & Paykel WL70T60D, WL80T65D installation instructions Aqua Rinse, End of Cycle beeps

Page 24

22

Changing pre-set options

Aqua Rinse

 

 

Rinse Options

 

On the High Efficiency cycles you can

Softener light on

Double Aqua Rinse

 

 

Softener light off

Aqua Rinse

change the pre-set rinse option.

The pre-set rinse option on these cycles

 

 

is a water efficient Aqua shower rinse.

 

 

This rinse can be altered to provide

 

 

a more intensive rinse for people with

 

 

sensitive skin.

 

 

1Enter the Option Adjustment mode (refer to page 20).

2Press SOFTENER to change to a double Aqua rinse.

3Press POWER to save your selection.

End of Cycle beeps

The number of beeps that signal the end of the cycle can be altered. Choose between no beeps, five or fifteen beeps. The DELAY START button adjusts the cycle signal setting.

End of Cycle Beeps

1hr light

No beeps

 

 

3hr light

5 beeps

 

 

9hr light

15 beeps

 

 

1Enter the Option Adjustment mode (refer to page 20).

2Press the DELAY START button to adjust the cycle signal setting.

3Press POWER to save your selection.

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Installation instructions and user guide Contents Introduction Welcome to AquaSmart Installation instructions InstallationUnpacking Drain hoseInstallation instructions Water supplyInlet hoses ElectricalClothes washer safety Accessories and spare partsLevelling your machine Before you do your first wash AquaSmart water consumptionAquaSmart capacity Getting started quickly DetergentGetting started quickly High Efficiency mode Conventional modeUnique AquaSmart wash Detergent Activating washSorting and loading Fully automatic water levelSorting and loading Sorting LoadingWhere do I put my detergent? DetergentChoosing the right detergent How much detergent?Cleaning the dispenser Fabric softenerChoosing the right cycle Adding the fabric softenerChanging the wash cycle options Wash cycles explained RegularHeavy DelicateWash cycles explained Sheets ColoursWash cycles explained Easy IronWash cycle options explained Delay Start SoakWash Advance Auto drain Lid lockTo unlock the lid at any time press START/PAUSE Customising the wash cycles To customise a cycleOption Adjustment mode To enter Option Adjustment modeChanging pre-set options Wash temperatures Controlled ColdAqua Rinse End of Cycle beepsOut-of-Balance recovery routine Reset Back to Factory SettingsAutomatic Recovery option Machine Stops optionControl Panel Lighting When you have finished the cycle Cleaning your AquaSmartCleaning the soft touch buttons and topdeck Cleaning the inside of your washerCleaning your low profile agitator Automatic lint disposal systemNappy sanitisers/bleach ABC washing guide Drying. Advance cycle to Spin using the Advance button Hottest setting in the dryer that the fabric will handleDamp Items Duvet/Doona InnersColour loss LingerieNappies Sensitive SkinTablecloths Such as table cloths. Choose Sheets cycleTea Towels Throws Choose Bulky cycle TowelsHOT and Cold water temperature lights are both flashing HOT water temperature light is flashingMusical series of beeps every 5 seconds and… Spin Speed and the Rinse or Spin light is flashingBefore you call for service Solving operating problems Wash Cycle Time longer than usual Small amount of Water in Bowl AT END of CycleSolving wash problems Black or Gray Marks on ClothesManufacturer’s warranty This warranty does not coverFisher & Paykel undertakes to Customer care New Zealand if you need assistanceAustralia if you need assistance Product details Model/Serial NoNZ AU
Top Page Image Contents