Fisher & Paykel WL70T60D, WL80T65D installation instructions Wash Cycle Time longer than usual

Page 36

34

Solving operating problems

Wash CYCLE TIME longer than usual.

If water pressure is low, cycle time will increase due to longer fill times. Ensure that inlet hose filters are not blocked.

Your machine may have initiated Wash Recovery Mode where it has sensed your load is washing unevenly. Ensure your machine is loaded evenly. Wash very heavy or very large items separately.

ADDING WATER in the middle of the wash/increased wash volume.

Your machine may have initiated Wash Recovery Mode where it has sensed your load is washing unevenly. Ensure your machine is loaded evenly. Wash very heavy or very large items separately.

Small amount of WATER IN BOWL AT END OF CYCLE.

It is normal for a small amount of water to discharge from the fill nozzle after a wash.

Liquid remaining in FABRIC SOFTENER DISPENSER at end of cycle.

A small amount of water remaining in the dispenser at the end of the cycle is normal.

Try cleaning your fabric softener dispenser to remove any blockages.

If the dispenser is at MAX level at the completion of the cycle, check for and remove any blockages.

If problems persist, contact your Fisher & Paykel dealer or service agent.

Image 36
Contents Installation instructions and user guide Contents Introduction Welcome to AquaSmart Installation instructions InstallationUnpacking Drain hoseInstallation instructions Water supplyInlet hoses ElectricalClothes washer safety Accessories and spare partsLevelling your machine Before you do your first wash AquaSmart water consumptionAquaSmart capacity Getting started quickly DetergentGetting started quickly High Efficiency mode Conventional modeUnique AquaSmart wash Detergent Activating washSorting and loading Fully automatic water levelSorting and loading Sorting LoadingWhere do I put my detergent? DetergentChoosing the right detergent How much detergent?Cleaning the dispenser Fabric softenerChoosing the right cycle Adding the fabric softenerChanging the wash cycle options Wash cycles explained RegularHeavy DelicateWash cycles explained Sheets ColoursWash cycles explained Easy IronWash cycle options explained Delay Start SoakWash Advance Auto drain Lid lockTo unlock the lid at any time press START/PAUSE Customising the wash cycles To customise a cycleOption Adjustment mode To enter Option Adjustment modeChanging pre-set options Wash temperatures Controlled ColdAqua Rinse End of Cycle beepsOut-of-Balance recovery routine Reset Back to Factory SettingsAutomatic Recovery option Machine Stops optionControl Panel Lighting When you have finished the cycle Cleaning your AquaSmartCleaning the soft touch buttons and topdeck Cleaning the inside of your washerCleaning your low profile agitator Automatic lint disposal systemNappy sanitisers/bleach ABC washing guide Drying. Advance cycle to Spin using the Advance button Hottest setting in the dryer that the fabric will handleDamp Items Duvet/Doona InnersColour loss LingerieNappies Sensitive SkinTablecloths Such as table cloths. Choose Sheets cycleTea Towels Throws Choose Bulky cycle TowelsHOT and Cold water temperature lights are both flashing HOT water temperature light is flashingMusical series of beeps every 5 seconds and… Spin Speed and the Rinse or Spin light is flashingBefore you call for service Solving operating problems Wash Cycle Time longer than usual Small amount of Water in Bowl AT END of CycleSolving wash problems Black or Gray Marks on ClothesManufacturer’s warranty This warranty does not coverFisher & Paykel undertakes to Customer care New Zealand if you need assistanceAustralia if you need assistance Product details Model/Serial NoNZ AU