Installation instructions
Levelling your machine
It is IMPORTANT to level the machine to ensure good spin performance and effective detergent and fabric softener dispensing.
1Separate the 4 rubber foot inserts from the moulding and fit into the feet on the base of the machine.
2Move the machine to its final position. (We suggest a minimum clearance of 20 mm each side).
3Adjust the feet so the machine is level and cannot rock.
4Turn on the water and check all hose connections for leaks. Make sure there are no kinks in the hoses.
5Uncoil power cord and plug into wall socket.
Adjustable feet
Rubber insert
Fig.4 Adjusting levelling feet
Correct
Incorrect
To check levelling look down on the wash bowl
Lid
Wind left foot down
(out) to correct
Topdeck Lid
Topdeck Lid
Wind right foot down
(out) to correct Topdeck
Fig.5 To assess levelling check lid alignment
Clothes washer safety
This clothes washer is not intended for use by young children or infirm persons without supervision.
Your AquaSmart™ can only be opened during the initial fill stage. Once the fill is complete, the lid will be locked for safety reasons. Please supervise young children to ensure they do not play with this clothes washer.
Important!
If you are using an extension cord or a portable electrical outlet device (eg.
Accessories and spare parts
Available from your Fisher & Paykel Dealer or Authorised Service Centre.
Inlet Valve Cap - Part No. 388491, | Hose Inlet Long (2 m) - Part No. 422680 |
Hose Inlet Large Bore - Part No. 426123, | Drain Hose Extension - Part No. 425627p |
Power Cord - If the Power Cord of your clothes washer is damaged it must be replaced by a Fisher & Paykel Authorised Service Centre, as it is not a standard power cord.