Solving wash problems
CREASING.
35
Was the washer or dryer overloaded?
Selecting the EASY IRON cycle will minimise creasing.
Try not to leave wet clothes sitting in the washer or laundry basket.
LINTING.
Was the washer overloaded?
Wash lint givers, eg. towels, separately from lint receivers, eg. synthetics.
Have you used enough detergent?
Over drying clothes in the dryer can cause them to attract lint.
Try using a Conventional cycle (refer to page 8).
POOR SOIL REMOVAL.
Did you use enough detergent for the amount of dirt?
Are you using a good quality detergent?
Was the washer overloaded?
Separate heavily and lightly soiled garments.
Use a wash temperature suitable for soil type, eg. warm for greasy soils, cold for muddy soil.
DETERGENT RESIDUE.
Did you use too much detergent?
Was the washer overloaded?
Is your cold water less than 20°C? – select Controlled Cold temperature option.
Try using liquid detergent.
Try dissolving powdered detergent in warm water before adding to the dispenser.
DYE TRANSFER.
Remember to separate whites and colours.
Wash
Remember to remove items from washer as soon as the wash is finished.
BLACK or GRAY MARKS on Clothes.
Are you using enough detergent for the amount of dirt?
Empty machine and put through a AUTO CLEAN cycle.
TANGLING.
Have you separated out larger items from smaller items?
Try using a Conventional cycle.
Try using the EASY IRON cycle to wash Shirts.
Wash sheets on their own using the SHEETS cycle.
Try washing smaller load sizes.
If problems persist, please contact your Fisher & Paykel dealer or service agent.