Fisher & Paykel WL70T60D, WL80T65D installation instructions Before you call for service

Page 34

32

Before you call for service

The COLD water temperature light is flashing.

Check that the cold water supply has been turned on.

Your cold water temperature may exceed the recommended limits (refer to Installation instructions pages 2 – 4).

Check that the inlet hose filter is not blocked.

Check that the inlet hose is not kinked or squashed.

Check that the inlet hoses have been connected to the correct taps.

The flow rate of the supply water may be too slow.

The WASH cycle light is flashing.

Your machine is overloaded and cannot continue the cycle.

Ensure the machine is stationary and remove items until the remaining ones can move freely.

Check that the machine is not siphoning (refer to Installation instructions pages 2 – 4).

The RINSE and SPIN lights are flashing.

Your machine has a suds build-up. Too much detergent may have been used for the amount of soil in the load.

Ensure that you are using a HE Low Sudsing, Matic or Front Loader type detergent.

Wait for suds to dissolve (about 20 minutes).

Rinse clothing using the RINSE and SPIN cycle, or run through another cycle.

For a bulky load, press down as far as possible and press START/PAUSE.

The LID LOCK light is flashing.

Check that the lid is closed.

Press START/PAUSE.

If the symptom persists, call your Fisher and Paykel Dealer or Authorised

Service Centre.

Single beep every second and …

The service light (spanner icon) is flashing.

1.Turn your machine off at the wall.

2.Wait 1 minute and turn it back on.

3.Check your machine is level (refer to installation instructions pages 2 – 4).

4.Remove load and retry.

5.Put through a RINSE and SPIN cycle.

6.If the fault re-occurs repeat steps 1 and 2.

If the machine still will not work, call your Fisher & Paykel Dealer or Authorised Service Agent to arrange service (refer to page 37).

Image 34

Contents Installation instructions and user guide Contents Introduction Welcome to AquaSmartUnpacking Installation instructionsInstallation Drain hoseInlet hoses Installation instructionsWater supply ElectricalAccessories and spare parts Clothes washer safetyLevelling your machine AquaSmart water consumption Before you do your first washAquaSmart capacity Getting started quickly DetergentGetting started quickly Unique AquaSmart wash High Efficiency modeConventional mode Detergent Activating washFully automatic water level Sorting and loadingSorting and loading Sorting LoadingChoosing the right detergent Where do I put my detergent?Detergent How much detergent?Choosing the right cycle Cleaning the dispenserFabric softener Adding the fabric softenerHeavy Changing the wash cycle optionsWash cycles explained Regular DelicateWash cycles explained Sheets ColoursWash cycles explained Easy IronWash cycle options explained Soak Delay StartWash Advance Lid lock Auto drainTo unlock the lid at any time press START/PAUSE Customising the wash cycles To customise a cycleTo enter Option Adjustment mode Option Adjustment modeChanging pre-set options Wash temperatures Controlled ColdAqua Rinse End of Cycle beepsAutomatic Recovery option Out-of-Balance recovery routineReset Back to Factory Settings Machine Stops optionControl Panel Lighting Cleaning the soft touch buttons and topdeck When you have finished the cycleCleaning your AquaSmart Cleaning the inside of your washerAutomatic lint disposal system Cleaning your low profile agitatorNappy sanitisers/bleach ABC washing guide Damp Items Drying. Advance cycle to Spin using the Advance buttonHottest setting in the dryer that the fabric will handle Duvet/Doona InnersNappies Colour lossLingerie Sensitive SkinTea Towels TableclothsSuch as table cloths. Choose Sheets cycle Throws Choose Bulky cycle TowelsMusical series of beeps every 5 seconds and… HOT and Cold water temperature lights are both flashingHOT water temperature light is flashing Spin Speed and the Rinse or Spin light is flashingBefore you call for service Solving operating problems Wash Cycle Time longer than usual Small amount of Water in Bowl AT END of CycleSolving wash problems Black or Gray Marks on ClothesThis warranty does not cover Manufacturer’s warrantyFisher & Paykel undertakes to Australia if you need assistance Customer careNew Zealand if you need assistance Product details Model/Serial NoNZ AU