Philips SBC SC368 warranty Monitoring baby’s sounds, HOW to USE the Baby Monitor

HOW TO USE THE BABY MONITOR

Monitoring baby’s sounds

To use the units to listen to your baby:

•Position the Baby unit at least 1 metre away from the baby so that the microphone (A-1) can pick up baby’s sounds.

•Set the channel switch to the same position on both units.

•Push the POWER switch on the baby unit (A-4) to switch it on.

•Set the SENSITIVITY control (A-5) on the Baby unit to about mid-range (5).

•The green TRANSMIT light (A-3) lights when a sound is picked up.

•Move away from the Baby unit with the Parent unit.

•Switch on the Parent unit using the Volume control/Off (B-5) and adjust the volume to the level you prefer.

•Extend the antenna on the Parent unit (B-3) to get the best reception.

•If required, re-adjust the SENSITIVITY control (A-5) on the Baby unit to set the level at which the microphone will start to pick up sounds.

When the SENSITIVITY control (A-5) is set to 9, the microphone picks up even the softest sounds. Experiment with different levels until you find the setting that suits you and your baby best.

The green LINK light (B-1) lights continuously when the Parent unit and the Baby unit are in touch with each other.

4