Philips SBC SC368 warranty Problem Solving, Problem Possible Cause Solution

PROBLEM SOLVING

Problem	Possible Cause	Solution
Power light does not light	Unit is not turned on.	Turn Volume control/Off switch
(Parent unit).		clockwise (B-5).
	Batteries are low.	Recharge batteries.
Power light does not light	Unit is not turned on.	Push the Power switch (A-4) to
(Baby unit).		switch on the unit.
	AC adapter is not plugged in or	Plug in AC adapter or replace
	Batteries are exhausted.	batteries.
	AC adapter plugged into an	If the power socket has a switch,
	outlet that is not working.	turn it on.
High pitched noise.	Units are too close together.	Move Parent unit away from
		Baby unit.
	Volume too high.	Turn volume control on Parent
		unit counter-clockwise.
No sound.	Volume control on Parent unit is	Turn volume control/Off switch
	set too low.	clockwise (B-5).
	Units are out of range.	Move Parent unit closer to Baby
		unit.
Power light blinking.	Batteries are low or empty.	Parent unit:- recharge batteries.
		Baby unit:- replace batteries or
		connect to mains power.
Interference or poor	Mobile or cordless phones too	Move the phones away from the
reception.	close to the baby monitor can	units.
	cause interference.

6